587981
21
Zoom out
Zoom in
Previous page
1/60
Next page
Mounting instructions for expert personnel
For the installation of the entire
system, the operating instruc-
tions of the indoor units and
the chiller and/or heating sys-
tem must be observed.
The indoor units and chiller
work independently. They do
not have to be interconnected.
Select an installation site that
guarantees free air inlet and
outlet. See the "Minimum
clearance" section.
Do not install the unit in the
direct vicinity of units with
intensive heat radiation.
Installation in the vicinity of
heat radiation reduces the unit
output.
Lift the unit only at the in-
tended points. Never load the
medium or refrigerant lines.
The medium connection lines,
valves, and connections must
be insulated in a vapour-
diffusion-tight manner. If
necessary, the condensate
line (only units with heat
pump function) must also be
insulated. In combined systems
with cooling and heating
modes, the requirements of
the current energy savings
ordinance (Energie-Einspar-
Verordnung (EnEV) in
Germany) must be observed.
Protect open lines against the
penetration of dirt. Never press
in the lines.
Avoid unnecessary bends.
Establish all electrical
connections according to the
locally valid regulations.
Always connect electrical
lines properly to the electrical
terminals.
Fires may otherwise result.
Observe the static and other
construction regulations and
conditions in regard to the
installation site.
When selecting the installation
site, pay attention to a possible
noise reflection of the units in
the environment and on the
mounting surface.
To prevent the transmission of
vibrations to the mounting sur-
face, the units must be mount-
ed on vibration-absorbent
materials or vibration-isolated
foundations.
Make sure the lines are also
vibration-isolated.
If special requirements are
placed on the noise emissions
of the installation site, locally
adapted sound insulation
measures must be taken.
In such cases, please contact
a corresponding specialist
consultant.
Important information
prior to installation
2 Vertical unit transport
Tension point
1 Upright unit transport
Transport
Bring the unit as close
as possible to the installation
site
while still in the original
packaging. In this way, you can
prevent
transport damage.
The units may be moved only
into their mounting position
(upright) using suitable means
of transport (Figure 1).
Secure against tipping!
The unit must be transported
in a vertical position to higher
installation sites (Figure 2).
Check the package contents
for completeness and check the
unit for visible transport dam-
age.
Report any damage immediate-
ly to your contracting partners
and the shipping company.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWG500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWG500 in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWG500

REMKO KWG500 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info