587981
20
Zoom out
Zoom in
Previous page
1/60
Next page
Fault indication with code
Code Alarm type Reset
Input
type
Deactivation
Input value
Automatic
Manual
Digital
Analogue
Only signalling
Compressor(s)
Condenser
fan
Circulation
pump
ACF Configuration error x x x
AEFL
Differential pressure monitor / flow monitor /
medium pressure switch reacted
FL / PS
x
x x x x
AEP1 Maintenance interval of circulation pump 1 PA 29 x x
AEP2 Maintenance interval of circulation pump 2 PA 30 x x
AEht Medium inlet temperature too high PB1
x
x x
ALc1 General fault, unit 1
x
x x x
ALOC Unit off
x
x x x x
AP1 Temperature sensor defective (medium inlet) PB1 x x x x
AP2 Temperature sensor defective (medium outlet) PB2 x x x x
AP3 Temp. sensor / pressure transmitter defective PB3 x x x x
AP4 Temp. sensor / pressure transmitter defective PB4 x x x x
AP5 Temp. sensor / pressure transmitter defective PB5 x x x x
AP6 Temp. sensor / pressure transmitter defective PB6 x x x x
AP7 Temp. sensor / pressure transmitter defective PB7 x x x x
AP8 Temp. sensor / pressure transmitter defective PB8 x x x x
AP9 Temp. sensor / pressure transmitter defective PB9 x x x x
AP10 Temp. sensor / pressure transmitter defective PB10 x x x x
APS /
ASPh
Phase sequence relay reacted / defective KA3
x
x x x x
ArtF Real-time clock defective x x
ArtC Fault counter defective x x
AtE1
Overcurrent protection switch of circulation
pump 1
QM 11 x x x x
AtE2
Overcurrent protection switch of circulation
pump 2
QM 11 x x x x
Atr1 Cabled remote control not connected QE 9-10-11 x x x x
b(n)HP High-pressure circuit (n) HP 1 - 2 x(n) x(n)
b(n)LP Low-pressure circuit (n) LP 1 - 2 x(n) x(n)
b(n)AC Anti-frost protection circuit (n), cooling mode PB1 x(n) x(n) x(n) x(n)
b(n)AH Anti-frost protection circuit (n), heating mode PB1 x(n) x(n) x(n) x(n)
b(n)hP
Overtemperature, condensation / overtem-
perature, condensation
RPT (n) x(n) x(n) x(n) x(n)
b(n)lP
Evaporation pressure low / overtemperature
evaporator; control fuse FU4 triggered
RPT (n) x(n) x(n) x(n) x(n)
b(n)tF Overheating protect., condenser fan circuit (n) TX 1-6 x(n) x(n) x(n) x(n)
b(n)dF Thawing time exceeded, circuit (n)
C(n)HP High-pressure, compressor (n) x(n)
C(n)tr
Thermal contact of compressor (n), overcur-
rent protection switch, overheating protection
triggered
QT 1-6 x(n) x(n)
C(n)Mn Maintenance interval, compressor (n) CO 53 - 58 x(n) x(n)
Messages
OFF External enabling contact opened x x x x x
b(n)dS Manual deactivation, circuit (n) CrEn x x(n)
C(n)dS Manual deactivation, compressor (n) CoEn x x(n)
Reset
1. Faults with automatic reset: The faults are reset automatically.
2. Faults with manual reset: The fault can be reset only by a specialist after the fault has been remedied.
3. Faults with partial manual reset: The fault is reset automatically at first; after that, it can only be reset manually by a specialist after the fault has been remedied.
REMKO KWG
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWG500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWG500 in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWG500

REMKO KWG500 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info