726822
50
Zoom out
Zoom in
Previous page
1/60
Next page
Diaphragm expansion vessel
n The preliminary pressure for the diaphragm
expansion vessel must be adjusted individually
to the system layout, the volume of the medium
and the installation site.
n If necessary
, change the installation site. For
this, the manufacturer's authorisation is
required.
Valves for hydronic balancing
n The calculated excess pressure in the pipe net-
work layout at the individual cold water outlets
must be adjusted with the hydronic balancing
valves.
Safety valve
n The safety valves and their correct function
must be checked.
n The drain line for the valves is to be checked
for function and leak tightness.
n If necessary
, change the installation site. For
this, the manufacturer's authorisation is
required.
Additional checks
General checks
n Checking that minimum clearances are correct.
n Checking the possibility of transferring cooling
and heating capacity via the cold or hot water
consumer (indoor unit).
Electrical checks
n Checking electrical connections for correct
phase sequencing.
n Function check of the cooling mode / heating
mode enable (option).
n Function check of the enable Operation /
Standby (option).
Checking the medium cycle
n Checking the circulation pump for freedom of
movement.
n Checking whether all valves are open.
n Checking the medium cycle.
n Setting the circulation pump's nominal flow
rate.
Checking the cooling circuit
n Checking the cooling circuit for adequate oil /
refrigerant.
n Checking the cooling circuit for leak tightness.
n Checking the medium cycle.
n Setting the circulation pump's nominal flow
rate.
The units are equipped with a phase sequence
relay which prevents the operation of the con-
troller if the direction of rotation of the electric
power supply is wrong. The rotary field must be
replaced if the controller is not activated during
commissioning of the unit.
REMKO KWE
50
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWE serie 150-180-220-250-300-320-370-440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWE serie 150-180-220-250-300-320-370-440 in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWE serie 150-180-220-250-300-320-370-440

REMKO KWE serie 150-180-220-250-300-320-370-440 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info