726827
32
Zoom out
Zoom in
Previous page
1/52
Next page
Fig. 39: Break through the opening
Fig. 40: Install the nozzles
Adjoining room connection
The unit can also be used to cool an adjoining
room through a duct system, e.g. hidden behind a
suspended ceiling. The following prerequisites
must be met for this:
n Observe the regional regulations concerning
air treatment.
n Fit a collar with a nominal diameter of 100 mm
to the adjoining room connection.
n The cooling capacity of the indoor unit must be
suf
ficient for both rooms.
n An opening must be made between both
rooms to allow the air to circulate.
n The maximum pipe length of 7 m should not be
exceeded (Fig. 41).
n In order to ensure that the air is transported to
the adjoining room, close off 1 or 2 of the 4 out-
lets on the cover. Stick a black single-sided
adhesive fabric strip over the outlet openings
being covered. This strip must be able to with-
stand the effects of a continual air flow.
max. 7 m
A
B
Fig. 41: Adjoining room connection
A: Main room
B: Adjacent room
Fresh air connection
The unit can also be employed to suck in and reg-
ulate the temperature of fresh air (outdoor air), in
addition to room air
. This is the preferred option for
rooms with a high rate of air consumption.
n Observe the regional regulations concerning
air treatment.
n Fit a collar with a nominal diameter of 100 mm
to the fresh air connection (Fig. 42
).
AB
1
Fig. 42: Fresh air connection
1: Outdoor air intake
A: Outside
B: Inside
REMKO KWD
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWD serie 25-35-45-55-70-85-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWD serie 25-35-45-55-70-85-100 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWD serie 25-35-45-55-70-85-100

REMKO KWD serie 25-35-45-55-70-85-100 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info