717067
26
Zoom out
Zoom in
Previous page
1/64
Next page
6.2 Connecting the
refrigerant piping
The refrigerant pipes should be connected by the
customer on the right-hand side of the outdoor
component.
1. Use the wall or floor brackets to fit the out-
door unit against structural parts approved to
support the static load (refer to the installa-
tion instructions for the brackets).
2. Ensure that structure-borne sound is not
transferred to parts of the building. Use vibra-
tion dampers to reduce the effects of struc-
ture-borne sound!
NOTICE!
Installation should only be performed by
authorised specialists.
CAUTION!
Both units are pre-filled with refrigerant at the
factory. Suitable protective clothing must be
worn during installation.
NOTICE!
Use only tools which are approved for use in
an HVAC environment.
6.3 Connection of
quick-release couplings
The refrigerant pipes should be connected by the
customer on the right-hand side of the outdoor
component. The pre-filled refrigerant piping are
connected to the outdoor unit by means of the
quick-connector system. Once installed, the con-
nections should be insulated to make them vapour
diffusion proof. The following instructions describe
the installation of the refrigerant piping for the
indoor unit on the outdoor unit.
Please note that the following figures are only
schematic representations. The actual appear-
ance of the units may vary from those shown.
1. Remove the pre-installed plastic cover from
the outdoor unit(
Fig. 28).
Fig. 28: Remove the plastic cover
2. Remove the green/black protective caps from
the quick-connectors on the outdoor compo-
nent, as well as the flexible refrigerant pipes
on the indoor unit (
Fig. 29 and Fig. 30).
Fig. 29: Remove protective caps
REMKO BL...DC
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO BL353 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO BL353 DC in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO BL353 DC

REMKO BL353 DC User Manual - German - 64 pages

REMKO BL353 DC User Manual - Dutch - 64 pages

REMKO BL353 DC User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info