717067
25
Zoom out
Zoom in
Previous page
1/64
Next page
5.7 Wall bracket for the indoor unit
A
B
D
G
C
E
F
H
Fig. 26: Mounting points for the wall bracket BL 263-353 DC IT (rear view, all dimensions in mm)
Unit type /
dimensions
A B C D E F G H
BL 263 DC IT 350 365 45 47 115 213 548 167
BL 353 DC IT 395 410 44 47 115 245 580 225
(All dimensions in mm)
The diameter of the pipe break-through is 65 mm for all units types.
The wall bracket for the units must be attached with suitable screws and anchors.
6 Installation
6.1
Installation of the indoor unit
The indoor unit is attached by means of a wall
bracket, taking into consideration the air outlet side
located in the lower part.
1. Mark the mounting points on the structurally
permissible building sections according to the
dimensions of the wall bracket.
2. If necessary, remove the break out opening
of the housing.
3. Connect the refrigerant piping, electrical
cables and condensate drainage line to the
indoor unit as described below.
4. Hang the indoor unit onto the wall bracket by
tilting it back slightly and by pressing the
bottom part of the unit against the bracket.
5. Check again that the unit is level. (
Fig. 27)
Fig. 27: Horizontal positioning
The wall bracket for the units must be attached
with suitable screws and anchors.
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO BL353 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO BL353 DC in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO BL353 DC

REMKO BL353 DC User Manual - German - 64 pages

REMKO BL353 DC User Manual - Dutch - 64 pages

REMKO BL353 DC User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info