587577
18
Zoom out
Zoom in
Previous page
1/32
Next page
Installation instructions for technicians
Important notes before
installation
■
Select the installation location
to ensure clear air input and
output. (See section „Minimum
clearances“).
■
Do not install the unit in
the immediate vicinity of
devices with intensive thermal
radiation. Installation near
thermal radiation reduces the
unit output.
■
Open the blocking valves of the
refrigerant lines only after the
installation is complete.
■
Seal off open refrigerant lines
with suitable caps or adhesive
strips to avoid infiltration of
moisture and never kink or
compress the refrigerant lines.
■
Avoid unnecessary bends.
You thereby minimize loss of
pressure in the refrigerant lines
and ensure clear return flow of
the compressor oil.
■
Make special preparations
regarding the oil return when
the exterior unit is located
above the inner unit. (See
section „Oil return flow
measures“).
■
If the single length of the
refrigerant lines exceeds
5 meters, then refrigerant has
to be added. For the quantity of
additional refrigerant, refer to
chapter „Add refrigerant“.
■
Only use the union nuts for
the refrigerant lines provided
in the delivery scope, and
remove them just shortly before
connecting them with the
refrigerant lines.
■
Make all electrical connections
according to valid DIN and DE
regulations.
■
Always attach electrical lines
properly in electrical clamps.
Otherwise a fire could result.
The assembly and installation
of the units and components
may only be carried out by
especially trained technicians.
NOTE
■
Locate the unit in original
packaging as close as possible
to the installation point to
avoid transport damage.
■
Check the contents of the
packaging for completeness
and check the unit for visible
transport damage. Report
any damage immediately to
your contracting party and the
shipping company.
■
Lift the unit on the corners
and not on the refrigerant or
condensation connections.
■
The refrigerant lines (injection
and suction line), valves and
connections must be insulated
impervious to vapor diffusion.
If necessary, insulate the
condensation line also.
REMKO ATY
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATY350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATY350 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATY350

REMKO ATY350 Additional guide - German - 1 pages

REMKO ATY350 User Manual - German - 32 pages

REMKO ATY350 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info