616922
14
Zoom out
Zoom in
Previous page
1/164
Next page
14
ENGLISH
C
CLEANING YOUR i-LIGHT DEVICE
F CAUTION: Before cleaning your i-
LIGHT
, make sure that the device is switched OFF and the power cord
is disconnected from the device.
• Regularcleaninghelpstoensureoptimalresultsandalonglifeforthei-
LIGHT
device.
• TocleantheFlashWindow,useonlythelint-freeclothincludedwithyouri-
LIGHT
device. Take care not
to scratch or chip the Flash Window. Scratches and chips can reduce the eectiveness of the unit.
• Forstubbornstainsontheashwindow,dampenacottonswabwithsurgicalspiritorrubbingalcohol,
apply to the ash window and clean gently with the lint-free cloth provided.
Use a small hand-held vacuum to remove dust and debris from the hand piece vents.
F WARNING: If the Flash Window is cracked or broken, the unit must not be used. Never scratch the lter
glass or the metallic surface inside the Treatment Head.
F CAUTION: The i-
LIGHT
is a high voltage device. Never immerse in water. Never clean the unit or any of
its parts under a tap or in a dishwasher.
, Storage
• Switchotheunit,unplugandallowtocoolfor10minutesbeforestorage.
• Storetheunitinadryplaceatatemperaturebetween15ºCand35ºC
E
TROUBLESHOOTING
Always read these instructions fully before using i-LIGHT
• Refertothistroubleshootingguideifyouexperienceanyproblemswithi-
LIGHT
, as this section
addresses the most common problems you could encounter with i-LIGHT. If you have followed the
instructions in this section and continue to experience problems, please contact the Remington®
Service Centre for further assistance.
, The power switch is ON, but the unit is not working.
• Makesuretheunitispluggedintoaworkingelectricaloutlet.
• Tryswitchingtoadifferentoutlet.
, The unit appears to have cracks or is broken.
• Donotuseiftheunitisdamaged.Ifyouhaveconcernsaboutusingtheunit,discontinueuseand
contact the Remington® Service Centre for further assistance.
, I have switched the unit ON, but I cannot increase or decrease the energy level.
• Tryresettingtheunitbyturningitoffandwaitingseveralsecondsbeforeturningitbackon.
, The Bulb Status Indicator Light turns green but the unit does not flash when the button is pressed.
• MakesuretheSkinContactSensorisinfullcontactwiththeskin.
• Tryresettingtheunitbyturningitoffandwaitingseveralsecondsbeforeturningitbackon.
, There is a strange smell.
• Besuretheareaiscompletelyshavedbeforetreatment.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL6250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6250 in the language / languages: All languages as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info