616922
12
Zoom out
Zoom in
Previous page
1/164
Next page
12
ENGLISH
1 Place the i-
LIGHT
hand piece against your skin so the Flash Window is flush with the skin surface.
2 Ensure the Skin Contact Sensors are fully engaged and the Bulb Status Indicator Display is illuminated
green (Fig. 7).
3 Press the Flash Button to deliver a flash.
• Mildtomoderatediscomfortisnormal.IfaflashdeliveredatEnergyLevel1feelstolerable,increaseto
Energy Level 2. Move the device to a different spot and flash the i-LIGHT one more time. Repeat this
process until you find the setting that feels right for you.
• Wait24hoursandthenlookatthetestarea.Iftheskinappearsnormal,proceedwithyourfirstfull
treatment at the energy level you determined is right for you.
, NOTE: You must test the device on each area of the body you wish to treat.
C
TREATMENT
• Multi-FlashMode:Thei-LIGHTdevicewillashwhentheFlashButtonispressedandwillcontinueto
ash every 3 seconds when the skin contact sensors are fully engaged. The Multi-Flash mode allows
you to quickly treat large areas by simply gliding the hand piece over the skin after each ash.
, How to treat:
Place the Flash Window rmly against the skin - ensure the Skin Contact Sensors are fully engaged.
, NOTE: When the Skin Contact Sensors are fully engaged you will hear a ‘chirp and the Bulb Status
Indicator Display will illuminate green.
2 Press the ash button to deliver a ash. You should expect to see a bright ash of light (similar to a
camera ash), and you should feel a mild sensation of warmth.
3 Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
• ForSingle-FlashMode,presstheFlashButtoneachtimeyoumovetothenextarea.
• ForMulti-FlashMode,keepyourngerontheFlashButtontokeepitdepressedandglidetothenext
area being sure to keep the Skin Contact Sensors fully engaged. The next ash will be delivered
automatically after 3 seconds.
, NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact,
simply resume treatment by repeating the above steps.
Fig. 7
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL6250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6250 in the language / languages: All languages as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info