616921

Remington IPL6000F Manual

8
Zoom out
Zoom in
Previous page
1/95
Next page
1514
ENGLISHENGLISH
E
TROUBLESHOOTING / STORAGE / MAINTENANCE
, i-Light Device Maintenance
F CAUTION: Before performing maintenance on your i-Light device, ensure that the power switch is OFF
and the power cord is disconnected from the base unit.
, Replacing the Bulb
1. Press the treatment head release buttons and gently pull to remove the treatment head.
2. Gently pull out the old bulb cartridge.
3. Replace with a new bulb cartridge.
F CAUTION:Whenreplacingthebulbcartridge,donottouchtheashbulbsdirectlyasthisleavesoilsand
residue.Doingsocouldreducetheeectivenessofthebulbsorcausethemtocrackduringtreatment.
4. Replace the treatment head, making sure it snaps into place.
, Storage
• Switchotheunit,unplugitandletitcooldownfor10minutesbeforestorage.
• Storetheunitinadryplaceatatemperaturebetween15ºCand35ºC.
, Troubleshooting
Always read these instructions fully before using i-Light. Refer to this troubleshooting guide if you
experience any problems with i-Light, as this section addresses the most common problems you could
encounter with i-Light. If you have followed the instructions in this section and continue to experience
problems, please contact the Remington® Service Centre for further assistance.
The power switch is ON, but the unit is not working.
• Makesuretheunitispluggedintoaworkingelectricaloutlet.
• Tryswitchingtoadierentoutlet.
The unit appears to have cracks or is broken.
Do not use if the unit is damaged. If you have concerns about using the unit, discontinue use and contact
the Remington® Service Centre for further assistance.
, Frequently Asked Questions
I have switched the unit ON, but I cannot increase or decrease the energy level.
• Tryresettingtheunitbyturningitoandwaitingseveralsecondsbeforeturningitbackon.
The Bulb Status Indicator Light turns green but the unit does not flash when the button
is pressed.
• MakesuretheSkinContactSensorisinfullcontactwiththeskin.
• Tryresettingtheunitbyturningitoandwaitingseveralsecondsbeforeturningitbackon.
There is a strange smell.
• Besuretheareaiscompletelyshavedbeforetreatment.
The treated areas become red after treatment.
• Thisisnormalandtherednessshouldsubside.Ifnot,tryusingalowerenergylevel.
I have not seen optimal results or hair has begun to grow back.
• Hairmaybegintogrowbackafteryourinitialtreatment.Thisisperfectlynormal.Foroptimalresults,
repeat the treatment when you notice hair regrowth.
Note: Do not treat the same area more than once a week.
F BE AWARE: If the unit is used over an extended period of time, the unit might
automatically disable momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down,
it will be ready to use again.
Intensity/Flash Mode LED Indication
AllcurrentlyselectedLEDsashing Unit is overheated and is disabled momentarily to
cool down.
IntensityLEDsashinginsequence Unitismalfunctioning.Turntheunito,waitafew
moments and try again. If problem persists, the
unit should be returned for repair.
AllLEDsashingwithwarningbeep Treatment head is removed or loose.
Audible Tones Indication
Not Full Contact Flash button was pressed while the skin contact
sensor was not fully engaged.
Replace Light Cartridge Light cartridge is missing or needs to be replaced.
Contact Sensors Stuck Flash button was pressed after the contact sensor
had been engaged since unit start up. Contact
sensor may be stuck.
, Frequently Asked Questions (www.remington-ilight.com)
Q. What is i-Light? What is Intense Pulse Light (IPL)?
A. IPL works by directing an extremely short, intense pulse of filtered light into the skin. The light is
absorbed by the coloured pigments in and surrounding the hair and disables the hair follicle
temporarily, preventing hair regrowth.
Q. Who can use i-Light?
A. Both men and women can use i-Light to remove unwanted hair anywhere below the neck, and
females can use to treat facial hair below the cheekbone. i-Light has been designed for individuals with
light to medium skin tones and dark hair. Safe skin tones include white, ivory, tan, beige and light
brown only. Safe natural hair colours include black, dark brown and medium brown.
Q. What areas of my body can I treat with i-Light?
A. i-Light is designed for unisex use on areas below the neck, including the legs, underarms, bikini line,
arms, chest and back. Females can also use on facial hair below the cheekbone.
Q. What can I expect from i-Light?
A. i-Lightprovidessafeandeectivesalon-gradehairremovalusingIPLtechnology.
GB
DNLFEIDKSFINPSK
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL6000F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6000F in the language / languages: All languages as an attachment in your email.

The manual is 10,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info