616921

Remington IPL6000F Manual

5
Zoom out
Zoom in
Previous page
1/95
Next page
98
ENGLISHENGLISH
, Bulb Status Indicator Display (fig. 1-8)
The device is ready to flash when the Bulb Status Indicator Display is illuminated green.
NOTE: if the Flash Button is pressed AND the Skin Contact Sensor is not fully engaged OR the Bulb Status
Indicator Display is not illuminated, an audible “beep” will sound. When the Bulb Status Indicator Display
illuminatesyellow,thereare150ashesremainingintheashbulb.WhentheBulbStatusIndicatorDisplay
ashesyellow,thebulbcartridgehasbeenusedupandwillnolongeroperate.Youmustreplacethebulb
cartridge to continue using the device.
, Treatment Head Release Buttons (fig. 1-14)
Press both buttons and gently pull to remove the treatment head.
F WARNING: ALWAYSensuretheunitisOFFandthepowercordisdisconnectedbeforeremovingthenose
cone.IfthenoseconeisremovedwhiletheunitispoweredON,allindicatorlightsonthebaseunitwillash
and audible “beeps” will sound.
C
GETTING ACQUAINTED WITH i-LIGHT
, Long-Life Light Cartridge (fig. 1-15)
Thelong-lifelightcartridgewilldeliver65,000ashesregardlessoftheenergylevelselected.Whileitis
unlikely you will ever need to replace it; it can be replaced by another long-life cartridge SP-6000FQ. Please
contact your local Remington® service centre.
, Energy Level Selection (fig. 1-6)
The i-Light device is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest
setting.
TIP:Forthemosteectiveresults,alwaysusethehighestenergylevelthatdoesnotcausediscomfortonthe
skin. To determine the energy level being used, observe the number of lights illuminated on the Energy
Level Display (fig 1 - 9).
Youri-LightdevicewillautomaticallybesettoEnergyLevel1eachtimethedeviceispoweredON.To
change the level, press the Energy Level Selection Button.
, Test the i-Light device on your skin
1. Review the Warnings and Safety Precautions.
2. Familiarise yourself with the features of the i-Light.
3. Consult the Skin Tone Chart to ensure your skin colour is in the acceptable range (fig. 5).
4. Place the skin of the intended treatment area onto the skin tone sensor - touching the skin tone
sensor (fig. 6).
If your skin is suitable, the appliance will beep and switch on.
Ifyourskinisunsuitable,theappliancewillbuzzandremaino.
5. Test the i-Light device on a small patch of skin and wait 48 hours to ensure there are no adverse
reactions. (fig.7).
Fig. 5
Fig. 6
Fig. 7
, Treat desired area(s) with the i-Light device
Prepare your skin for treatment
1. Ensure the area to be treated is clean and free from oils, deodorants, perfume, make up, lotions and
creams. Shave or trim the hair from the area to be treated (fig 8).
2. Never use wax, epilation, tweezers or depilation products to remove the hair because they counteract
the IPL process.
Prepare the device for treatment
3. Unwrap the hand piece cord from the i-Light base and rest the hand piece in the base cradle. Locate
the power switch on the i-Light base and ensure the unit is OFF. Connect the power cord to the i-Light
base at the power inlet. Connect the power cord to the wall outlet. Turn the power switch ON. (fig. 9)
4. Use the skin sensor to unlock the unit (fig. 6).
Youmustunlocktheunitoneachbodypartyouwishtotreat.
5. Select the desired Energy Level. (fig. 10).
Ifyourskinisunsuitable,theappliancewillbuzzandremaino.
Fig. 8
Fig. 9
Fig. 10
GB
DNLFEIDKSFINPSK
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL6000F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL6000F in the language / languages: All languages as an attachment in your email.

The manual is 10,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info