616904

Remington HC5880 Manual

7
Zoom out
Zoom in
Previous page
1/136
Next page
7
• Oncethebladesetisfullydried,toenhanceperformanceandprolongthe
life of your clipper, we strongly recommend for you to oil the blades. To be
properly oiled, the blade set needs to be removed, so drops of oil can be
added to the back gliding surface.
, EVERY SIX MONTHS
• Atregularintervalsthebladesetshouldberemovedandcleaned.
• Removethe2screwsretainingthexedbladewithahexscrewdriver.Donot
remove blade set.
• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donot
remove the lubricating grease on the plastic components. It is not necessary
to remove the small moving blade from the unit.
• Takeoutthehexscrewsanddisassemblethebladeset.Brushandcleanout
accumulated hair. Oil the contact surfaces of the blades and then
reassemble.
• Ifthebladesarenotcorrectlyaligned,cuttingeciencywillbeimpaired.
• Placeafewdropsofclipperoilontothebladesglidingsurface.Wipeo
excess oil.
C CLEANING CAUTIONS
• Ensuretheapplianceisswitchedoandunplugfromthemainoutletbefore
cleaning
• Onlytheattachmentguidecombsandbladesetmayberemovedfromthe
product for cleaning.
• Donotuseharshorcorrosivecleanersontheunitsortheirblades.
• Suitableforcleaningunderanopenwatertap
BATTERY REMOVAL
• Thebatterymustberemovedfromtheappliancebeforeitisscrapped.
• Theappliancemustbedisconnectedfromthesupplymainswhenremoving
the battery.
• Ensurethattheclipperisdischargedofallpoweranddisconnectedfromthe
mains
• Liftorprythedecoplateonthelowerportionoftheclipperandunscrew2
screws located on the back housing of the clipper.
• Remove4screwsofinnerhousingtoexposebatteries
• Liftorprythecoverplateonthebottomofthebatterychamber.
• Removethe2batteriesandprintedcircuitboardassemblyfromthebattery
chamber.
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PLRUTRROGRSL
AE HR
UA
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington HC5880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC5880 in the language / languages: All languages as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info