805746
57
Zoom out
Zoom in
Previous page
1/88
Next page
Code Display text Description Solution
A.02.33 AF top comm err Auto filling top communication has
exceeded feedback time
The maximum time for refilling the system auto
matically has been exceeded:
No or low water pressure in the supply line:
check that the main water valve is fully open.
Water leakage from the boiler or system: check
the system for leaks.
Check that the maximum time for refilling is
suitable for the system: Check parame
ter AP069.
Check that the maximum water pressure for re
filling is suitable for this system: Check param
eter AP070.
Important
The pressure difference between the
minimum (parameter AP006) and
maximum (parameter AP070) water
pressure must be high enough to pre
vent there being too short a time be
tween two filling attempts.
The valve on the automatic (re)filling unit is
faulty: Replace the unit.
A.02.34 AF min inter err Auto filling minimum interval time
has not been reached between two
requests
The system must be refilled too quickly by the au
tomatic (re)filling unit:
Water leakage from the boiler or system: check
the system for leaks.
Latest refill ended just above the minimum wa
ter pressure because it was interrupted by the
user, or because the water pressure in the sup
ply line was (temporarily) too low.
A.02.36 Funct device lost Functional device has been discon
nected
SCB not found:
Bad connection: check the wiring and connec
tors
Faulty SCB: Replace SCB
A.02.37 Uncritic device lost Uncritical device has been discon
nected
SCB not found:
Bad connection: check the wiring and connec
tors
Faulty SCB: Replace SCB
A.02.45 Full Can Conn Matrix Full Can Connection Matrix SCB not found:
Carry out an auto-detect
A.02.46 Full Can Device Adm Full Can Device Administration SCB not found:
Carry out an auto-detect
A.02.48 Funct Gr Conf Fault Function Group Configuration Fault SCB not found:
Carry out an auto-detect
A.02.49 Failed Init Node Failed Initialising Node SCB not found:
Carry out an auto-detect
A.02.55 Inval or miss SerNR Invalid or missing device serial num
ber
Contact your supplier.
A.02.69 Fair mode active Fair mode active Contact your supplier.
A.02.76 Memory full The reserved space in memory for
custom parameters value is full. No
more user changed possible
Configuration error:
Reset CN1 and CN2
Faulty CSU: Replace CSU
Replace the CU-GH
10 Troubleshooting
7684359 - v.11 - 13122021 57
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 30 - T-Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 30 - T-Control in the language / languages: English as an attachment in your email.

The manual is 4.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info