805748
26
Zoom out
Zoom in
Previous page
1/76
Next page
5.5.3 Connecting the connection box
The connection box is included with the delivery of the boiler as standard.
Use the connection cables supplied to connect the connection box to the
control unit. Proceed as follows:
1. Connect the supplied connection cable X033 to the connector
underneath the boiler.
2. Connect the supplied connection cable X017 to the connector
underneath the boiler.
3. Loosen the 2 screws of the connection box holder underneath the
boiler by a quarter of a turn.
4. Push the holder slightly back and fold it down.
5. Loosen the 2 screws in the connection box by a quarter of a turn.
6. Open the cover of the connection box.
7. Slide and click the connection box into position on the connection box
holder.
8. Connect the connection cable X033 with the connector in the
connection box.
9. Connect the connection cable X017 with the connector in the
connection box.
10. Now connect the desired external controllers to the other connectors.
Proceed as follows:
10.1. Lay the cable under the strain relief clip.
10.2. Press the strain relief clip firmly in place.
10.3. Close the connection box.
10.4. Press the 2 screws in the connection box.
11. Lift the holder up and slide it forward into position.
12. Tighten the 2 screws of the connection box holder underneath the
boiler by a quarter of a turn.
Important
The connection box can also be mounted on the wall. Use the
screw holes on the back of the connection box. The supplied
connection cables must not be extended. Special extension
cables are available as an accessory.
Fig.23 Opening the connection box
AD-0000117-04
90º
3
4
90º
12
7b
11
L = 0.4 m
X033
X017
2
1
7a
9
8
90º
5
6
10
5 Installation
26 7701838 - v.09 - 10122021
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 135 - T Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 135 - T Control in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info