805748
24
Zoom out
Zoom in
Previous page
1/76
Next page
5.4 Connecting the flue gas outlet and air supply
Sinsertion depth 50 mm
1. Fit the flue gas outlet pipe to the boiler.
2. Fit the subsequent flue gas outlet pipes and air supply pipes in
accordance with the manufacturer's instructions.
Caution
The pipes must be flue gas-tight and corrosion-resistant.
The flue gas outlet pipe must be smooth and deburred.
Connect the pipes so that they are stress-free.
The pipes must not rest on the boiler.
Fit the horizontal parts sloping down towards the boiler, with a
slope of 50 mm per metre.
5.5 Electrical connections
5.5.1 Control unit
The table gives important connection values for the control unit.
Supply voltage 230 VAC/50 Hz
Main fuse value F1 (230 VAC) 6.3 AT
Fan 230 VAC
Danger of electric shock
The following components of the boiler are connected to a 230 V
power supply:
(Electrical connection for) circulating pump
(Electrical connection for) gas combination block 230 RAC
(Electrical connection of) fan
The majority of components in the control unit
Ignition transformer
Power supply cable connection
Various connections in the connection box
The boiler has a three-wire mains lead (lead length 1.5 m) and is suitable
for a 230 VAC/50 Hz power supply with a phase/neutral/earth system. The
boiler is not phase sensitive. The boiler is completely pre-wired.
Caution
Always order a replacement mains lead from Remeha. The
power supply cable should only be replaced by Remeha, or by
an installer certified by Remeha.
The switch must be easily accessible
Use an isolating transformer for connection values other than
those stated above.
The control panel and the connection box still need to be fitted. The PCBs
are also placed in the connection box.
Fig.19 Connecting the flue gas outlet and
air supply
AD-0000221-01
Ø100/150 mm
S
Fig.20 Connectors from the control unit
CU-GH06 (front view)
AD-0000915-01
X07
X08
X10
X09
X11
X12
X06
X05
X04
X03
X02
X01
5 Installation
24 7701838 - v.09 - 10122021
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 135 - T Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 135 - T Control in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info