Manual Remeha Gas HP 35 A LT-HT (page 44 of 74) (English)

805757

Zoom out

Zoom in

1/74

Connect the button as instructed below.

You will need: the appliance disconnected from the electricity supply

The cable required to connect the reset button must be 3x0.75mm1. 2.

Cut a suitable length of cable.2.

Connect the cable to the blind terminals A (see Figure 5.15 Button connection for 3.

ﬂame controller reset → 45).

The blind terminals are hidden on the rightinside the cable tray. To extract them, remove

the cover of the tray, slide the cables out of the provided slots, and carefully close the tray

again.

The cable may not be longer than 20 metres.

Incorrect wiring of the reset button may damage the component irreparably. Check the

cabling carefully before powering the unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas HP 35 A LT-HT in the language / languages: English as an attachment in your email.

The manual is 11.83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remeha Gas HP 35 A LT-HT Manual

Product: