805733
69
Zoom out
Zoom in
Previous page
1/96
Next page
1 The display will show a corresponding code and message.
2 The status LED of the control panel will show:
Continuous green = Normal operation
Flashing green = Warning
Continuous red = Blocking
Flashing red = Lock out
When an error occurs, proceed as follows:
1. Press and hold the button to reset the appliance.
The appliance starts up again.
2. If the error code reappears, correct the problem by following the
instructions in the error code tables.
Important
Only qualified professionals are authorised to work on the
appliance and system.
The error code remains visible until the problem is solved.
3. Note the error code when the problem cannot be solved and contact
your installer.
10.1.2 Warning
Tab.71 Warning codes
Code Display text Description Solution
A.00.00 TFlow Open Flow temperature sensor is either
removed or measures a temperature
below range
Zone flow temperature sensor open:
Sensor is not present.
Wrong Zone Function setting: check the setting
of parameter CP02x.
Bad connection: check the wiring and connec
tors.
Incorrectly fitted sensor: make sure that the
sensor has been correctly fitted.
Faulty sensor: replace the sensor.
A.00.01 TFlow Closed Flow temperature sensor is either
shorted or measures a temperature
above range
Zone flow temperature sensor short-circuited:
Sensor is not present.
Bad connection: check the wiring and connec
tors.
Incorrectly fitted sensor: check that the sensor
has been correctly fitted.
Faulty sensor: replace the sensor.
A.01.21 Dhw Temp GradLevel3 Maximum Dhw Temperature Gradi
ent Level3 Exceeded
Temperature warning:
Check the flow.
A.02.06 Water Press Warning Water Pressure Warning active Water pressure warning:
Water pressure too low; check the water pres
sure
A.02.37 Uncritic device lost Uncritical device has been discon
nected
SCB not found:
Bad connection: check the wiring and connec
tors
Faulty SCB: Replace SCB
A.02.45 Full Can Conn Matrix Full Can Connection Matrix SCB not found:
Carry out an auto-detect
A.02.46 Full Can Device Adm Full Can Device Administration SCB not found:
Carry out an auto-detect
A.02.49 Failed Init Node Failed Initialising Node SCB not found:
Carry out an auto-detect
Fig.99 Error code display on HMI T-control
AD-3001379-01
Error Code: A.00.00
..... ... ....... .... .. ..... ....... .... ..... .......
i
........ .......
Home Screen22/02/2018 11:20
20/02/2018 16:51
.......... ......... .... ............ ........... ... ..... ....
...... ..... ......... ... ....... .......
.......... .........
... .........
1
2
10 Troubleshooting
7734324 - v.06 - 01102021 69
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 320 Ace at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 320 Ace in the language / languages: English as an attachment in your email.

The manual is 6.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 320 Ace

Remeha Gas 320 Ace Usermanual and installation guide - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info