805735
77
Zoom out
Zoom in
Previous page
1/92
Next page
Code Description Solution
H03.00 Safety parameters level 2, 3, 4 are not correct or
missing
Parameter error: security kernel
Restart the boiler
Replace the CU-GH PCB
H03.01 No valid data from CU to GVC received Communication error with the CU-GH PCB:
Restart the boiler
H03.02 Measured ionisation current is below limit No flame during operation:
No ionisation current:
Vent the gas supply to remove air
Check that the gas valve is fully opened
Check the gas supply pressure
Check the operation and setting of the gas valve
unit
Check that the air supply inlet and flue gas outlet
are not blocked
Check that there is no recirculation of flue gases
H03.05 Gas Valve Control internal blocking occured Security kernel error:
Restart the boiler
Replace the CU-GH PCB
11.1.3 Lock-out - FSB-WHB-HE-150-300
Tab.48 Lock out codes
Code Description Solution
E00.00 Flow temperature sensor is either removed or
measures a temperature below range
Flow temperature sensor open:
Bad connection: check the wiring and connectors.
Incorrectly fitted sensor: check that the sensor has
been correctly fitted.
Faulty sensor: replace the sensor.
E00.01 Flow temperature sensor is either shorted or
measures a temperature above range
Flow temperature sensor short circuited:
Bad connection: check the wiring and connectors.
Incorrectly fitted sensor: check that the sensor has
been correctly fitted.
Faulty sensor: replace the sensor.
E00.04 Return temperature sensor is either removed or
measures a temperature below range
Return temperature sensor open:
Bad connection: check the wiring and connectors
Incorrectly fitted sensor: check that the sensor has
been correctly fitted
Faulty sensor: replace the sensor
E00.05 Return temperature sensor is either shorted or
measures a temperature above range
Return temperature sensor short-circuited:
Bad connection: check the wiring and connectors
Incorrectly fitted sensor: check that the sensor has
been correctly fitted
Faulty sensor: replace the sensor
E00.08 Heat exchanger temperature sensor is either
removed or measures a temperature below range
Heat exchanger temperature sensor open:
Bad connection: check the wiring and connectors.
Incorrectly fitted sensor: check that the sensor has
been correctly fitted.
Faulty sensor: replace the sensor.
E00.09 Heat exchanger temperature sensor is either shorted
or measures a temperature above range
Heat exchanger temperature sensor short-circuited:
Bad connection: check the wiring and connectors.
Incorrectly fitted sensor: check that the sensor has
been correctly fitted.
Faulty sensor: replace the sensor.
11 Troubleshooting
7665063 - v.05 - 18102018 77
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 220 Ace at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 220 Ace in the language / languages: English as an attachment in your email.

The manual is 9.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 220 Ace

Remeha Gas 220 Ace Usermanual and installation guide - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info