805745

Remeha Gas 210 Ace Manual

19
Zoom out
Zoom in
Previous page
1/84
Next page
Diameter(1) 100 mm 130 mm 130 mm(2) 150 mm 180 mm(2)
Gas 210 Ace 160 - 15 m 22 m 44 m 60 m
Gas 210 Ace 200 - 6 m 8 m 24 m 60 m
(1) While maintaining the maximum length, additional 5 times 90° or 10 times 45° bends can be used (indicated for each boiler type and
diameter).
(2) With concentric roof terminal 150/220 mm.
Maximum flue lengths for C53
LA Length from the terminal up to the air inlet connection.
LB Length from the flue gas connection up to the terminal.
Calculation: L = LA + LB
Important
The maximum permitted height difference between the air inlet
and the roof terminal is 36 m.
Tab.16 Maximum length (L)
Diameter(1) 150 mm
Gas 210 Ace 80 60 m(1)
Gas 210 Ace 120 60 m
Gas 210 Ace 160 32 m
Gas 210 Ace 200 19 m
(1) While maintaining the maximum length, additional 5 times 90° or 10 times 45° bends can be used (indicated for each boiler type and
diameter).
Reduction table
Tab.17 Pipe reduction for each bend - radius ½D (parallel)
Diameter 100
mm
110
mm
130
mm
150
mm
180
mm
200
mm
45° bend 1.4 m 1.5 m 1.6 m - - -
90° bend 4.9 m 5.4 m 6.2 m - - -
Tab.18 Pipe reduction for each bend - radius 1D (parallel)
Diameter 100
mm
110
mm
130
mm
150
mm
180
mm
200
mm
45° bend - - 1 m 1.2 m 1.4 m 1.6 m
90° bend - - 1.8 m 2.1 m 2.5 m 2.8 m
4.5.5 Additional guidelines
Installation
For installing the flue gas outlet and air supply materials, refer to the
instructions of the manufacturer of the relevant material. After
installation, check at least all flue gas outlet and air supply parts for
tightness.
Warning
If the flue gas outlet and air supply materials are not installed in
accordance with the instructions (e.g. not leak-proof, not correctly
bracketed), this can result in dangerous situations and/or physical
injury.
Make sure that the flue gas outlet pipe towards the boiler has a sufficient
gradient (at least 50 mm per metre) and that there is a sufficient
condensate collector and discharge (at least 1 m before the outlet of the
boiler). The bends used must be larger than 90° to guarantee the
gradient and a good seal on the lip rings.
Fig.13 Flue system length
AD-3002013-01
LALB
Fig.14 Bend radius ½D
AD-3001608-01
R=½D
D
Fig.15 Bend radius 1D
AD-3001609-01
D
R=1D
4 Before installation
7837114 - v.01 - 10012023 19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 210 Ace at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 210 Ace in the language / languages: English as an attachment in your email.

The manual is 6.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info