805745
16
Zoom out
Zoom in
Previous page
1/84
Next page
Tab.8 Type of flue system: C63
Principle Description Recommended manufactur
ers(1)
This system is supplied by us without an air inlet and flue.
When selecting the material, please note the following:
Condensed water must flow back to the boiler.
The material must be resistant to the flue gas temperature of
this boiler.
Maximum permissible recirculation of 10%.
The air inlet and flue must not be placed on opposite walls.
Minimum permitted pressure difference between the air inlet
and the flue is -200 Pa (including -100 Pa wind pressure).
Use is only allowed when all
our requirements are met and
the description of this type of
flue system is respected.
(1) The material must also satisfy the material property requirements from the relevant chapter.
Tab.9 Type of flue system: C93
Principle(1) Description Recommended manufactur
ers(2)
AD-3001059-01
Room-sealed version.
Air inlet and flue in shaft or duct:
Concentric.
Air supply from existing shaft or duct.
Flue gas discharge via the roof.
Air inlet is in the same pressure zone as the flue.
Connection material and roof
terminal:
Alukan
Burgerhout
Cox Geelen
Muelink & Grol
(1) See table for shaft or duct requirements.
(2) The material must also satisfy the material property requirements from the relevant chapter.
Tab.10 Minimum dimensions of shaft or duct C93
Version (D) Without air supply With air supply
Rigid 100 mm Ø 160 mm □ 160 x 160 mm Ø 170 mm □ 160 x 160 mm
Rigid 150 mm Ø 200 mm □ 200 x 200 mm Ø 220 mm □ 220 x 220 mm
Rigid 200 mm Ø 250 mm □ 250 x 250 mm Ø 280 mm □ 280 x 280 mm
Concentric 100/150 mm Ø 170 mm □ 170 x 170 mm Ø 170 mm □ 170 x 170 mm
Concentric 150/200 mm Ø 270 mm □ 270 x 270 mm Ø 270 mm □ 270 x 270 mm
Important
The shaft must comply with the airtightness requirements of the
local regulations.
Important
Always clean shafts thoroughly when using flue liners and/or an
air supply connection.
It must be possible to inspect the flue liner.
4.5.2 Material
Use the string on the flue gas outlet material to check whether it is suitable
for use on this appliance.
Fig.7 Minimum dimensions of shaft or
duct C93
AD-3000330-03
D
Ø
D
4 Before installation
16 7837114 - v.01 - 10012023
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 210 Ace at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 210 Ace in the language / languages: English as an attachment in your email.

The manual is 6.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info