805760
3
Zoom out
Zoom in
Previous page
1/36
Next page
3
Product specication
Introduction
Congratulations on your purchase of a Remeha Flexistor unvented water heater. The Remeha
Flexistor products are manufactured in the UK from top quality materials and meets all the latest
relevant safety and constructional standards. The high grade Duplex stainless steel cylinder
o󰀨ers exceptional strength and corrosion resistance which is backed by a 30 year warranty* Its
performance and insulation levels exceed the latest requirements of Building Regulation Part L.
The Remeha Flexistor unvented water heater can be fed directly from the cold water mains
supply to the property without the need for separate feed cisterns or vent pipes. It is supplied
complete with all its necessary inlet and safety controls.
The Remeha Flexistor cylinder range all require a separate expansion vessel to accommodate
any expanded water.
General Requirements
IMPORTANT: Please read and understand this product guide before installing the Remeha
Flexistor water heater. Incorrect installation may invalidate the warranty*.
The Remeha Flexistor must be Installed, Commissioned and Maintained by a competent
installer in accordance with Building Regulation G3 (England and Wales), Technical Standard
P3 (Scotland) or Building Regulation P5 (Northern Ireland) and the Water Fitting Regulations
(England and Wales) or Water Byelaws (Scotland).
* See Terms and Conditions of warranty
THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND
PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK
OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND
THE HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE.
CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT
SUPERVISION
WARNING: Do not switch on if there is a possibility that the water in the heater is frozen.
Also:
- water may drip from the discharge pipe of the pressure-relief device and this pipe must be left
open to the atmosphere; (see page 19 for more details)
-the pressure-relief device is to be operated regularly to remove lime deposits and to verify that
it is not blocked; (see page 23 for more details)
- how hot water can be drained. (see page 23 for more details)
- A discharge pipe connected to the pressure-relief device is to be installed in a continuously
downward direction and in frost free environment; (see page 20 for details)
- details on how to set the temperature controls for immersion heaters can be found on pages
10.
Note: This Remeha Flexistor cylinder needs a minimum 100L/min water supply at open outlet.
Important Notice:
When installed with the KIWA approved unvented kit Remeha Flexistore cylinders are
approved as meeting current water regulations.
To satisfy these regulations when the kit is not supplied it will be required that the installer
ensures that all of the system components meet the required standards.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Flexistor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Flexistor in the language / languages: English as an attachment in your email.

The manual is 2.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info