413692

Rel quake Manual

12
Zoom out
Zoom in
Previous page
1/25
Next page
REL Acoustics ‘Q’ range User manual
12
CONNECTING UP
Always switch off your system before disconnecting any wires
To increase the versatility of connecting up, the “Q” range has two separate inputs. A Neutrik
Speakon socket and a pair of phono sockets. (single phono socket on Quake and Q108). As
mentioned, this is to facilitate use with both two channel stereo systems and AV surround sound
systems.
The high level, unbalanced, dual channel (stereo) input is via a Neutrik Speakon connector which is
connected to the power amplifier’s left and right channel speaker terminals. This has the advantage
of ensuring that the REL receives exactly the same signal as the main speakers. This means that the
character of the bass from the main system is carried forward into the sub-bass. This is a very
important point and together with the REL’s Active Bass Controller (ABC), ensures far superior
system integration of the sub-bass with the main system.
The low level input is via phono connectors and connects to the Sub/LFE output of the
amplifier/processor. Two inputs are available, 0dB and +12dB, (Single phono input on Quake and
Q108 at +12dB), it is usual to use the 0dB input but if the Sub/LFE output level of the
amplifier/processor is a little low then the higher sensitivity +12dB input can be used.
If the main speakers are active then again the low level input must be used and connected to the pre
amplifier outputs. Because the low level inputs are 0dB and +12dB an attenuator is necessary to
balance the two inputs, Quake and Q108 are not suitable for this method of connection as it
only has a single channel low level input.
Quake and Q108 also have an input for connection to a PC, this is via a 3.5mm jack socket
HI LEVEL and LO LEVEL inputs can be used simultaneously. The benefits are two-fold when used
with a home cinema system. The low level input reproduces the .1 Sub/LFE channel and the high
level connection underpins the main front speakers. The main front speakers should be set to the
‘large’ option on the processor. See “SETTING UP”
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rel quake at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rel quake in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info