716181
19
Zoom out
Zoom in
Previous page
1/57
Next page
36 37
Call
Briefly press button.
The device will send ringtone to all other devices within reach on this channel. You can select
the ringtone in the selection or turn it off.
Warning: calling function is availavle only in the „PMR446“ operating mode.
Keypad lock
All buttons except for PTT button can be turned off, to prevent accidental re-setting.
Locking buttons: Press and hold button for roughly 3 seconds, until the button lock
symbol appears.
Unlocking buttons: Press and hold button once again for roughly 3 seconds, until the
button lock symbol disappears.
VOX as hands-free
This is the sensitivity setting for hands-free. The device automatically recognizes when you
speak - you don‘t need to press the PTT button. This can be useful at a moment when your
hands are not free to press the PTT button.
Levels 1-4 correspond to the same sensitivity levels as under the „baby monitor“ operating
mode.
oF VOX is deactivated; normal operation with the help of PTT button (standard setting)
1. low sensitivity
2. medium sensitivity
3. high sensitivity
4. highest sensitivity
Monitoring functions
For reception of very weak signals, it is possible to deactivate automatic noise gate. This may
be useful in the border area of reception or when communication is faulty. Besides this, you
can easily listen to what is going on on the selected channel. To activate or deactivate moni-
toring functions, hold down MON button (on the left side of the device under the PTT button)
for a long time. Monitoring function is available only in the „PMR446“ operating mode.
Roger-Beep
The device can broadcast a tone sequence after releasing the PTT button.
Press the button , until rb appears on the display.
Press /, by which you will set on or oF.
For saving settings, briefly press the PTT button.
When Roger Beep is activated, the appears. Roger Beep is available only in the „PMR446“
operating mode.
Button tone
When pressing the buttons, a short signal tone sounds. For turning the sound of the buttons
on or off:
Press the button, until bP appears on the display.
Press /, by which you can choose on or oF.
For saving settings, briefly press the PTT button.
When the key sound is activated, the symbol appears. Key sound is only available in
„PMR446“ operating mode.
Range control in PMR446 operating mode
choose between AU (automatic), Pb (only manual range control) or oF, by which you will
turn offthe range control function. Activation or deactivation of range control is done on the
device on which you wish to effect range control. Even if the range control function is deac-
tivated on another device, you can undertake range control on your device..
In radio networks that consist of more than 2 of the same device, there is no sense in range
control because it is not possible to determine which device corresponds to it. This is why no
reach control exists for multiple devices in network.
Cleaning and maintenance
Always disconnect the mains adapters from the wall power socket before cleaning the unit.
Only use a slightly dampened cloth. Do not submerge the unit in water. Do not use chemical
detergents.This product does not require any special maintenance. Repairs to the unit must
be carried out by skilled personnel only.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 50133 Care and talk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 50133 Care and talk in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 17,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info