715744
23
Zoom out
Zoom in
Previous page
1/96
Next page
English 23
Automatic Out-Of-Range Function
The automatic out-of-range function is automatically activated in babysitter mode and
needs no further settings!
The automatic out-of-range function automatically checks every 60 seconds if baby
and parent units are communicating. The parent unit sends a “search pulse”, which is
answered by the baby unit. In case there is no reply for more than 2 minutes, then
both units are no longer communicating. This can be due to a dead spot, the
batteries of the other unit being exhausted or the unit being turned off., or there may
be interferences on the used channel.
During communication the icon is constantly displayed. The icon flashes in case
the communication is interrupted and the event is optically displayed on the parent
unit as OU and 5 beep tones are audible.
After 2 minutes the icon is again constantly displayed if a unit changes the location
and is again within the range of the other unit.
Activation and Deactivation of the Out-Of-Range Function
The out-of-range function can also be deactivated if not needed. Activation and
deactivation must be always made at the unit, which shall control the other (in case of
baby monitoring this is always the parent’s radio)
Press the MENU button four times.
The display shows, depending on the previous setting, AU, Pb or OF.
Press to select:
Pb manual out of range function on request (=Press button)
AU automatic function activated
OF automatic and manual function both deactivated
Manual Out-Of-Range Test
Independent of the automatic out-of-range control of the other unit you also have the
manual out-of-range test. This test is also available with the out-of-range function
deactivated on the baby unit!
On the press of a button you can determine if the other unit is within range. The automatic control
on the parent unit must be set to Pb or AU.
Press the button and wait a few seconds. The baby unit answers your request
and the parent unit plays a melody. Now you can be sure that you are at your
present position exactly within the communication range!
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 5006 - Scopi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 5006 - Scopi in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info