Manual Reer 5006 - Scopi (page 22 of 96) (English, German, Dutch, French, Italian, Spanish)

715744

Zoom out

Zoom in

1/96

22 English

Channel Number

The channel number must be the same for both units.

There are 9 possible settings, for the baby unit b 1 to b 9 and for the parent unit P 1 to P9.

1 to 9 stands for channel combinations programmed ex factory between PMR 446 radio

channels and CTCSS encoding. The numbers are only valid for this type of transceiver and

there is no communication with other baby monitors!

Set Channel

 Briefly press the MENU button once. The set channel will flash.

 Press to select a different setting.

 Press the PTT button to confirm or simply wait a few seconds.

Set Baby Monitor Sensitivity

You can set the sensitivity of the baby unit in 4 levels.

With initial installation the unit is set to level 4

 Briefly press the MENU button three times to access the VOX menu.

The display shows the sensitivity setting as a number on the right (between 1 and 4).

Press to select a level between 1 and 4.

1 setting for highest distance from the baby cot

2 medium sensitivity setting

3 low sensitivity setting

4 highest sensitivity setting (default setting) with additional talkback function

We recommend level 4 as start position. If your baby cries for a longer period without

breaks you may want to talk to your baby to calm it down. For this set the baby unit to

level 4 to allow you after 20 seconds of transmission to talk back for 10 seconds.

 Use these 10 seconds to talk to your baby and calm it down.

 Simply press the PTT button on the parent unit and talk to your baby.

As long as your baby is quiet you can speak from the parent unit at any time (if the

volume on the baby unit is not set to 00).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reer 5006 - Scopi in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reer 5006 - Scopi Manual

Product: