Manual Reer 46221 (page 14 of 30) (English, German, French, Italian)

716164

Zoom out

Zoom in

1/30

- 12 -

Open the handle by pressing the 2 buttons on both sides of the handle gently and

simultaneously, lift the handle. Ill. 13

Only pull out the adjustment screw until the distance between the attachment surface and

the adjustment screw is 3 - 4 mm. Ill. 14

Mark the positions of the clamping shells (f) on the top and the bottom, Ill. 15. Screw the holding

cups with the wooden mounting screws (k) tight onto the wall.

Remove the gate from the hinges and screw the hinge bolts (d) out of the gate compartment B

(b) until the distance between the non-extended pressure foot of the gate compartment A (a) and

the attachment surface is exactly 4 mm. Ill. 16

You may need to try several times.

Mark the position of the clamping shell (f) between the pressure foot and the attachment surface.

Screw the holding cups with the wooden mounting screws (k) tight onto the wall. Ill.17

ATTENTION: Ensure that the pressure foot is firmly on the floor.

Put the gate back on the hinges.

Mount upper hinge parts (g), see Ill. 18 and Ill. 19

Step 4

Adjustment of the

adjustment screws

on the gate

compartment (a)

Handling the door gate

To lift the handle, gently press both buttons simultaneously. Lift handle gently from the back /

bottom. If the buttons are pressed too hard, this complicates lifting the handle. Lift gate, remove

from the support shells and swing to the side.

When closing the door, ensure that the pressure foot below and the adjustment screw at the top

are positioned correctly in the support shells when the closure handle is lowered.

English (EN)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reer 46221 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reer 46221 Manual

Product: