Manual Reer 46221 (page 13 of 30) (English, German, French, Italian)

716164

Zoom out

Zoom in

1/30

- 10 - - 11 -

(A)

(B)

Attach the hinge bolts (d) to the top and the bottom of the gate compartment (b). Ill. 1 and Ill. 2

Before attaching the hinge bolts, nuts (e), insert the horizontal slats of the gate compartment (b)

in the provided slits on the top and bottom on the sides. Ill. 1 and Ill. 2

Place the gate compartments (a) and (b) flush next to each other so that there is no gap.

Only push the gate compartments far enough apart so that the gate compartment (a) has a

distance of exactly 28 mm between the last gate slat and the wall or door surface and the gate

compartment (b) has a distance of min. 30mm - max. 63 mm between the last gate slat and the

wall or the door surface. Ill. 3

Screw both of the gate compartments (a) and (b) respectively to each other at the top and the bottom.

For this purpose, insert the connection screws (i) in the drilled holes and tighten firmly with the screw

sleeves (j) from the other side. Ill. 4 and Ill. 5. Tighten the screws slightly with a Phillips screwdriver.

Check if both of the gate compartments are tightly attached to each other.

In order to limit the opening direction, installation of the stopper (n) is optional.

Optionally, the stopper (n) can be inserted either on the left or right. Mount the stopper (n) on the

desired side of the clamp shell (f). Ill. 6 and Ill. 7

Using the mounting template (l), mark the position for the screw holes needed for the hinges (h).

Ill. 8, Ill. 9 and Ill. 10 These are marked with the name “HINGE”.

Screw the lower hinge parts (h) with the wood mounting screws (k) (if attachment surface is

different, use appropriate screws and anchors) firmly to the wall. During this step, the mounting

screws (k) are only screwed in the lower screw hole of the hinges. Ill. 11 and Ill. 12

Now place the assembled gate compartments with the pre-assembled hinge bolts on the hinges.

Step1

Step 2

Installing the

Stopper

Step 3

Installing

the hinge side

Montage A

ATTENTION: Always open the gate away from the dangerous position to avoid dangerous

situations!

Installation on stairs

Especially well suited for installation at the top of stairs as it opens

completely and does not present a tripping hazard.

(A) Install at the top of the upper the stair

and do not install on one of the stairs.

(B) If the safety barrier is used at the bottom

of the stairs, it should be positioned in the front

of the lowest tread possible.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reer 46221 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reer 46221 Manual

Product: