668926
5
Zoom out
Zoom in
Previous page
1/81
Next page
CONSOLE GUIDE
U01-U03 User defined programs
Within these programs the user can define the speed and incline for a personal workout.
1. From standby screen press PROGRAM button until U01, U02 or U03 is displayed.
2. P ress MODE to enter the first segment of the program.
3. Press SPEED +/- to adjust the speed and INCLINE +/- to adjust incline for this segment and press MODE
to continue.
4. Repeat above for all 20 segments of the program.
5. Once the data is entered for all segments press START to begin.
When inputted the program will be saved within the selected user number (U01, U02 or U03).
Body fat function
1. P ress PROGRAM button until Body Fat Function is displayed.
2. T he SPEED/PROGRAM window will display the preset program (F1-F5).
3. P ress mode to select the required program.
4. The PULSE/INCLINE window will display the program parameters, press SPEED + or – to change this
and press MODE to confirm.
5. F1 – gender will be displayed. Press SPEED +/- to switch between 1 (male) and 2 (female). Press MODE
to confirm.
6. F2 – age will be displayed. Press INCLINE +/- to adjust (preset is 25 years). Press MODE to confirm.
7. F3 – Height will be displayed. Press INCLINE +/- to adjust (preset is 170cm). Press mode to confirm.
8. F4 – Weight will be displayed. Press INCLINE +/- to adjust (preset is 70kg). Press MODE to confirm.
9. F5 will be displayed. At this stage the user information has been stored. Place both hands on the pulse
sensors for approximately 8 seconds. The test results will then be displayed as below:
1 9 or below U nderweight
2 0-25 Normal Weight
2 5-29 O verweight
3 0 or above O bese
Note: All readings given are a guideline only and not to be used as a medical device.
HRC – Heart rate control
(Optional, only applicable to Treadmills with HRC and chest belt).
Note: The speed and incline levels can be adjusted manually during this program but they will alter
automatically to sustain workout. These cannot be changed manually during the first 60 seconds.
1. Press PROGRAM until HRC1, HRC2 or HRC3 is displayed.
2. P ress MODE to input user personal data (HRC will appear in SPEED window).
3. U sers age will be displayed (preset is 30). Press INCLINE +/- to change and Press MODE to confirm.
4. A recommended target heart rate will be displayed. To change this press INCLINE +/- and press MODE
to confirm.
5. The TIME window will show a preset time of 10.00 minutes. Press INCLINE +/- to change this and press
MODE to confirm.
6. P ress START to begin.
Note:
The speed will be adjusted automatically during the program to reach the target heart rate.
If the maximum speed is reached before the target heart rate the incline will be adjusted by 1 level to
increase this further.
If the target heart rate is reached the speed and incline will no longer be changed.
If the Target Heart Rate is reached the speed and incline will remain constant.
MPH to KPH conversion
The Speed and distance can be set to operate in MPH or KPH.
To switch between these:
1. Remove the SAFETY KEY, the computer will display”SAFETY KEY TAKE OFF”.
2. Press and hold PROGRAM and MODE buttons together for 2-3 seconds.
3. The console will change from MPH to KPH automatically
.
9.REEBOKFITNESSEQUIPMENT.COM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reebok GT60 Console at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reebok GT60 Console in the language / languages: English as an attachment in your email.

The manual is 10,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info