738119
6
Zoom out
Zoom in
Previous page
1/21
Next page
10 ASTRORIDE A6.0 Treadmill - User Manual www.reebokfitness.info 11
ENGLISH
BUTTON FUNCTIONS
A
PROGRAM
Selects the desired program (P0-P36, U01-U03,
FAT, HR1-HR3).
B
MODE
To select countdown mode for distance, calories
and time.
C
START
Press to start treadmill, the running belt will start
moving.
D
STOP
Press to stop treadmill, the running belt will slow
before stopping completely.
E
SPEED
Increase/decrease speed during workout.
Adjust parameters time/distance/calories.
F
QUICK SPEED
Use this to select a different speed whilst running.
G
INCLINE
Increase / decrease incline during the workout.
H
QUICK INCLINE
Use this to select a different incline whilst running.
I
FAN
Use this to start or stop the fan.
OPERATION PROCEDURE
MPH TO KPH CONVERSION
In Standby mode, remove the safety key and press
PROGRAM and MODE at the same time.
Speed will show ‘0.6’ for MPH or ‘1.0’ for KPH.
Repeat the above process to change again.
SAFETY KEY
The machine will not operate unless the red safety
key is inserted. If the safety key is out of place the
machine will shut down immediately. The screen will
display ‘E-07’ with a warning tone. The clip on the end
of the safety key must be attached to the user at all
times during your workout to ensure the machine stops
immediately in the event of emergency.
P0 MANUAL PROGRAM
Press PROGRAM to highlight ‘P0’.
Press MODE to change the countdown to TIME,
DISTANCE or CALORIES. These set parameters can
be adjusted using the +/-.
Press START to begin the exercise.
P1-P36 PROGRAMS
These are preset programs in which the machine will
change the speed and incline automatically during the
workout.
(NOTE: If the speed/incline is changed during this
program by the user the program will revert back to the
preset speed/incline in the next segment.)
From the standby screen, press PROGRAM to select
the required program.
Press START to select and begin using the preset
time. The default time is 30 minutes but this can be
adjusted using +/-.
During the program the speed and incline settings
are split into 16 segments. The time of each segment
depends on the overall time selected. For example,
16 minute program = 16 segments of 1 minute.
Therefore speed/incline would alter every 1 minute.
The console will count down and beep for 3 seconds
each time the speed/incline is changed.
U01-U03
On these programs the user can define the speed and
incline for a customised workout.
From standby press PROGRAM until U01, U02 or U03
are displayed.
Press MODE to enter the first segment of the
program.
Press +/- to adjust the speed for this segment. Press
MODE to continue.
Repeat for all the 16 segments of the program.
Once data has been entered into all segments press
START to begin.
When inputted the program will be saved within the
selected user number (U01, U02 or U03).
BODY FAT FUNCTION
Press PROGRAM until FAT is displayed.
Press MODE to confirm the selection and to begin
inputting the user parameters.
The TIME window will display the below parameters
that can be changed using +/-.
F1 - Gender will be displayed, Press +/- to switch
between 1 (male) and 2 (female). Press MODE to
confirm.
F2 - Age will be displayed. Press +/- to adjust (preset is
25 years). Press MODE to confirm.
F3 - Height will be displayed. Press +/- to adjust (preset
is 170cm). Press MODE to confirm.
F4 - Weight will be displayed. Press +/- to adjust
(preset is 70kg). Press MODE to confirm.
F5 will be displayed, at this stage the user must place
both hands on the pulse sensors for approximately 8
seconds. The test results will be displayed as below:
=< 19 Underweight
20-25 Normal weight
26-29 Over weight
30 or above Obese
HRC - HEART RATE CONTROL
The speed and incline levels can be adjusted manually
during this program but they will alter automatically
to sustain the workout. These cannot be changed
manually during the first 60 seconds.
Press PROGRAM until HR1, HR2 or HR3 is displayed.
Press MODE to input user data.
Users age will be displayed, use +/- to change. Press
MODE to confirm the input value.
A recommended Target Heart Rate will be displayed
(calculated from (220-age) x 0.6). To change press +/-
and press MODE to confirm.
The default time of 30:00 minutes will be displayed,
press +/- to change and press MODE to confirm.
Press START to begin.
The speed will be adjusted automatically during the
program to reach the target heart rate.
POWER SAVING
This product is manufactured in compliance with the
Erp Regulations and is fitted with a power saving
mode which will activate if the Treadmill is inactive for
a period of 4 minutes. To restart the treadmill simply
remove and reattach the safety key.
ENGLISH
H
TIME / INCLINE CALORIES / PULSEDISTANCESPEED
A
B
D
C
E
G
G
I
MP3
INPUT
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reebok Astroride A6.0 Treadmill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reebok Astroride A6.0 Treadmill in the language / languages: English, German, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info