659490
7
Zoom out
Zoom in
Previous page
1/152
Next page
7
RV-C316-E
GBR
Where:
50 is the standard number of cleaning tasks per year
87 is the standard dwelling surface to be cleaned in m²
4 is the standard number of times that a vacuum cleaner passes over each point on
the oor (two double strokes)
0.001 is the conversion factor from Wh to kWh
1 is the standard dust pick-up
0.20 is the standard difference between dust pick-up after ve and after two double
strokes
The annual energy consumption for hard oor vacuum cleaners .............................. 28.4 kWh/yr
AEhf=4*87*50*0.001*ASEhf*(1-0.2)/(dpuhf-0.2)
The annual energy consumption for general-purpose vacuum cleaners ................. 36.5 kWh/yr
AEgp=0.5*AEc+0.5*AEhf
Manufacturer reserves the right to make any modications to design, packaging, or techni-
cal specications of the product without prior notice.
Vacuum cleaner parts
A1
1. Housing
2. Dust collection container
3. Hose connection hole
4. Carrying handle
5.
Dust collection container release button
6. Rubberized wheels
7. “ON/OFF” button
8. Suction power control
9. Output EPA-lter lid
10. Automatic power cord reeling button
11. Hose
12. Multipurpose «oor/carpet» nozzle
13. Crevice nozzle
14. «2-in-1» nozzle
15. Telescope tube
16. Nozzle storage tting
Types of nozzles
A. «Floor/carpet» nozzle
B. Crevice nozzle for hard-to-reach places
C.
Combination nozzle «2-in-1» (with brush to clean household appliances and polished
surface, without brush to clean soft furniture).
I. BEFORE THE FIRST USE
Carefully remove the unit and its accessories from the packaging. Dispose of all packaging
materials and promotional stickers.
Keep all warning labels, warning stickers (if any), and serial number identication label
located on the housing.
After transportation or storage at low temperatures allow the appliance to stay at room
temperature for at least 2 hours before using.
Wipe the housing, the nozzles, the hose and the telescopic tube with a moist cloth and let them dry.
Vacuum cleaner can be plugged in only when it’s fully assembled with correctly adjusted
lters and the dust collection container!
I I. OPERATION
Assemblage
1. Ensure the vacuum cleaner is unplugged before assemblage.
2.
Put the dust collection container down onto projecting front part of the housing and press
down until it clicks.
3. Insert the special exible hose tting into the suction hole until it clicks into place.
4. Connect the hose handle to the telescopic tube and adjust the necessary nozzle.
Use
1. Press the lock on telescopic tube and adjust its length.
2. Pull the power cord by the socket to the desired length and plug in the appliance.
DO NOT stretch power cord beyond the red mark on the cable.
3. Press “ON/OFF” button on the housing.
4. Adjust suction power using the mechanical lock on the housing if necessary.
Maximum suction power is intended for hard oor coatings and heavily polluted carpets.
Minimum— for ne fabrics (e.g. lace curtains).
III. CLEANING AND MAINTENANCE
Unplug the vacuum cleaner before cleaning.
Dust collection container cleaning
Dust collection container should be emptied (even in case of underll) immediately at the end
of operation.
1. Press the button to remove the dust collection container and pull. Fit the container under
trash can (bag), press the lid release button. Clean the dust collection container.
2. Close the dust collection container and t it to the place.
Dust collection container and motor lter washing
It is recommended to clean lters and wash the dust collection container every two
months.
Remove the dust collection container and motor lter. Wash the motor lter and its components
under running water. Before tting the sponge bag lter and motor lter let them dry com-
pletely.
Forced lter drying may lead to its deformation.
EPA-lter replacement
ЕРА-lter is tted on the back side of the housing and xed by the protective screen. The average
lter service life is 12 months, and then it must be replaced.
Ensure all the lters are correctly adjusted before reusing the vacuum cleaner.
Store the assembled appliance in a dry, ventilated place away from heating appliances and direct
sunlight.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RV-C316-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RV-C316-E in the language / languages: All languages as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info