659430
6
Zoom out
Zoom in
Previous page
1/124
Next page
6
Carefully read all instructions before operating and save them for future
reference. By carefully following these instructions you can considerably
prolong the service life of your appliance.
IMPORTANT SAFEGUARDS
The manufacturer is not responsible for any failures
arising from the use of this product in a manner
inconsistent with the technical or safety standards.
This appliance is intended to be used in
household and similar applications such as:
staff kitchen areas in shops, ofces and
other working environments; farm houses;
by clients in hotels, motels and other resi-
dential type environments; bed and break-
fast type environments.
Before installing the appliance, check that
the device voltage corresponds with the
supply voltage in your home (refer to rating
plate or technical data).
While using the extension cord, make sure
that its voltage is the same as specied on
the device. Using different voltage may re-
sult in a re or other accident, causing ap-
pliance damage or short circuit.
The appliance must be grounded. Connect
only to a properly installed wall socket. Fail-
ure to do so may result in the risk of electri-
cal shock. Use only grounded extension cords.
CAUTION! During use the appliance becomes hot!
Care should be taken to avoid touching the housing,
bowl, or any other metal parts while operating. Make
sure your hands are protected before handling the
device. To avoid possible burns, do not lean above
the open appliance.
Always unplug the device after use, before
cleaning or moving. Never handle plug with
wet hands. Do not pull power cord to dis-
connect from outlet; instead, grasp plug
and pull to disconnect.
Keep the power cord away from hot surfaces
(gas or electric ovens) or sharp edges. Do not
let cord hang over edge of table or counter.
Remember: damaging the cord may lead to a failure
that will not be covered by the warranty. If the cable
is damaged or requires replacing, contact an autho-
rized service center only to avoid all risks.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RMC-M4500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RMC-M4500E in the language / languages: All languages as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info