597822
159
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
© 2007-2011 RED.COM INC. JUNE 22, 2011
158 158
Error Message: VALID SETTINGS (Invalid Settings)
Establish the maximum PROJECT settings for the media you are using and change
the settings accordingly. Refer to BASIC OPERATION > PROJECT SETUP.
Error Message: SATA_TRANS_FAULT
The camera is detecting a communications fault between the camera and drives (RED-RAM or RED-
DRIVE). The fault it has detected may or may not be severe enough to cause corruptions on the clips, so it
is highly recommended that you review the R3D files. Try to narrow the fault to a specific RED DRIVE or
DRIVE CABLE, and contact RED Support for further troubleshooting at www.red.com/support.
Error Message: Record Error: NO_DIGMAG
No media is being detected. Reattempt to mount, check connection and CF/REDMAG pins in Side Mod-
ule, power cycle, or try another media.
Error Message: WARNING! Media Removed Prior Unmount Data Integrity Risk
Media needs to be removed properly. Use the dual key command UNDO+EXIT, or the menu option SYS-
TEM > MEDIA > UNMOUNT. Refer to APPENDIX B: MANAGING DIGITAL MEDIA.
Error Message: The CF Card Has Not Been Speed Verified For Use on This Camera. Only 2k Reso-
lution Recordings are Possible. There is an Unquantifiable Risk of Drop Frames.
This may occur if you are using Non-RED CF cards and/or you have a damaged CF card or REDMAG.
Error Message: Record Error: NO_MEDIA_PATH
When you have a card in the camera that is reading unformatted and you should continue by formatting
the media. Refer to APPENDIX B: MANAGING DIGITAL MEDIA.
Error Message: Incompatible Project / Record Error: INCOMPATIBLE_DIGMAG
The following error may be displayed inserting a CF card or REDMAG or connecting a RED-DRIVE or
RED-RAM (the camera LCD will display DISK INCOMPATIBLE):
When this error is present, the camera will not record and will display the following message at the top of
the screen (the camera LCD will display INCOMPATIBLE_DIGMAG):
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info