597822
92
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
JUNE 22, 2011 © 2007-2011 RED.COM INC.
91
PVW REFRESH (FORMERLY HD-SDI)
Sets the1280 x 720p HD-SDI and HDMI monitor signal update rate to 50.00 or 59.94 Hz.
1. To change frame rate aspect ratio, select PVW REFRESH.
2. FRAME RATE box will highlight to allow you to choose from 50.00 HZ or 59.94 HZ (default is 59.94
(720p 59.94)).
NOTE: If in Europe you may wish to select 50.00 (720p/50.00).
3. Twist joystick to change the highlighted FRAME RATE box to the desired setting.
4. Move joystick left, right, up or push in to select.
HDMI
The camera includes a standard HDMI connector on its right side panel. This output provides a HDTV
compatible 1280 x 720 video signal or P.C monitor compatible 1280 x 848 pixel signal.
NOTE: If the PLAYBACK resolution is set to 1080p in the PLAYBACK menu, the HDMI output is
1280 x 720 pixels when in preview and record, but switches to 1920 x 1080 pixels in playback.
If after connecting the camera to an external monitor and the camera display is not shown completely on
the monitor display try the following:
Select PREVIEW and change setting between from VIDEO [720p] to MENUS [DVI].
Select PVW REFRESH and change setting between 50.00 HZ or 59.94 HZ.
EVF REFRESH
EVF Refresh: permits the operator to select the display refresh rate used by the RED EVF.
FIXED: The default mode is FIXED, which uses 2:3 or other appropriate pull down as required to display
images at a fixed frequency of 59.94 Hz (or 50Hz) at all image capture frame rates. This mode minimizes
display flicker, but will exhibit a 2:3 motion stutter on 24fps images.
SYNCED: The alternative mode is SYNCED. This avoids 2:3 pull down, and instead doubles the capture
frame rate for example displaying 24fps images at 48Hz (50Hz for 25.00 fps). The display may exhibit
luminance flicker due to the lower frame update rate, but it will not stutter.
NOTE: When in SYNCED mode, EVF display may blank for up to 3 seconds:
When existing OPEN GATE mode
After exiting MAGNIFY mode when in 4K record resolution
After changing between certain Varispeed frame rates
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info