597822
90
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
JUNE 22, 2011 © 2007-2011 RED.COM INC.
89
SET: Push SET to save these parameters to non-volatile memory, exits menu and returns to normal oper-
ation.
USER TITLE
Enables the user to program a custom Safe Title area. Operation is the same as USER ACTION. Refer to
the previous procedure for USER ACTION to modify settings.
PREVIEW
This sub-menu selects the operating mode of the HD Preview output.
If only one of either a RED EVF or RED LCD are present, the HD-SDI and HDMI outputs will support Sur-
round View, frame guides and safe action / title overlays, waveforms overlaid on a 1280 x 720 pixel video
signal. Both of these outputs include up to 4 channels of 24-bit 48KHz audio. The HDMI output is com-
patible with HDMI equipped 720p compatible HDTV monitors.
As a user choice, the HDMI (but not the three HD-SDI outputs) can support a 1280 x 848 pixel output with
Surround View, frame guides and safe action / title overlays, waveforms, and camera status and operation
menus. This signal is compatible with most DVI equipped SXGA computer monitors, but is not compatible
with HDMI equipped HDTV displays.
If both a RED EVF and RED LCD are present, the HD-SDI and HDMI outputs will be forced to 1280 x 720
(with Surround View) irrespective of the Preview Output parameter setting.
NOTE: The video format of the HD-SDI Preview output will also be affected by the HD-SDI refresh
rate and PLAYBACK resolution selections described elsewhere in this guide.
To select between 720p and 848p output options, select VIDEO (720p) or MENUS (DVI). The default is
VIDEO (720p) The Preview output setting will be held in camera memory.
NOTE: A shortcut to toggle between MENUS (DVI) and VIDEO (720) without entering the menu is to
press and hold the UNDO button, then press the Clip Start / Previous Clip button.
TEST SIGNAL
Permits the video monitor outputs to be replaced with a video test pattern.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info