Manual Red One 31.6.16 - 2011 (page 43 of 165) (English)

597822

Zoom out

Zoom in

1/165

Build 31 v31.6.16 Beta

42 42

SHUTTER MENU

Adjusts exposure time of each frame captured by the MYSTERIUM sensor. Shutter speed presets are

available for all common speeds (and corresponding angles) at 24 / 25 fps and 50 / 60 fps.

Preset shutter speeds may be adjusted using the RELATIVE and SYNCRO shutter parameters.

GENLOCK

References shutter scan start time (phase) to an external Tri-Level Sync genlock signal. For 3D and multi-

camera, permits scan time and scan phase of all cameras to be matched. To select: Use joystick to high-

light GENLOCK checkbox. Push in or down on joystick to place checkmark in GENLOCK checkbox.

GENLOCK ICON

When GENLOCK is checked, a PADLOCK icon will be displayed at the top of the EVF, LCD and all exter-

nal monitors. An external GENLOCK signal generator will need to be connected to the GENLOCK connec-

tor to allow full use of this feature (refer to GENLOCK under APPENDIX D: INPUT/OUTPUT CONNEC-

TORS).

- If the PADLOCK appears on its own as shown above, the camera is Genlocked. This means the shut-

ter start time is referenced to the external Genlock signal, so multiple cameras recording the same

scene will be capturing their individual images at the same moment in time if they are all Genlocked to

a common reference signal.

- If the PADLOCK has a red circle and diagonal bar through it as shown below, this indicates the sensor

is not Genlocked. Check that the Genlock signal generator frame rate is equal to the project TIME

BASE and / or the cabling and connections are correct.

NOTE: When recording at multiples of Genlock input frame rate, the EVF, LCD or any external

monitors may not indicate Genlock.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Red One 31.6.16 - 2011 Manual

Product: