597822
41
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
© 2007-2011 RED.COM INC. JUNE 22, 2011
40 40
TRIM
SINGLE CAMERA CONFIGURATION
Color Temperature calculations assume a pure light source that may not be true in the specific scene the
camera is imaging. To compensate for any residual colorcast, the TINT parameter can adjust the RGB
color balance with a compensating Magenta - Green color component. To adjust: Select TINT and twist
joystick to change the highlighted TINT box to the desired setting.
Range is -100 to 100, default is 0
NOTE: Pushing AUTO WB calculates a new Tint value. This is maintained if the Color Temp is ad-
justed via the Manual WB parameter. If you select the Tungsten or Daylight presets, Tint will be re-
set to zero, which is the default value.
MASTER / SLAVE CAMERA CONFIGURATION
The TRIM sub-menu permits fine adjustment of White Balance via the TINT parameter, and also permits
colorimetry differences seen by the Slave camera (such as between the transmitted and reflected paths of
a beam split mirror) to be dialed out from the Master camera when recording in 3D applications. For de-
tails on setting up Master / Slave configuration, go to APPENDIX E: MASTER / SLAVE CAMERA CONFI-
GURATION.
NOTE: Pushing AUTO WB calculates a new Tint value. This is maintained if the Color Temp is ad-
justed via the Manual WB parameter. If you select the Tungsten or Daylight presets, Tint will be re-
set to zero, which is the default value.
TINT (MASTER CAMERA TINT TRIM)
Color Temperature calculations assume a pure light source that may not be true in the specific scene the
camera is imaging. To compensate for any residual colorcast, the TINT offset parameter can adjust the
RGB color balance with a compensating Magenta - Green color component.
Range is -100 to 100, default is 0
NOTE: Pushing AUTO WB calculates a new Tint value. This is maintained if the Color Temp is ad-
justed via the Manual WB parameter. If you select the Tungsten or Daylight presets, Tint will be re-
set to zero, which is the default value.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info