769232
25
Zoom out
Zoom in
Previous page
1/182
Next page
25
DE PLIT ES HUEN FRNL PT RO EL
NOTE! Make sure that the base still rests flat on the car seat.
WARNING! The support leg 3 must always be in direct contact with the
vehicle floor. There must be no objects or spaces between the vehicle
floor and the supporting leg 3. If there are storage compartments in the
floor of the vehicle you must contact the vehicle manufacturer.
Removal of the base
Carry out the installation steps in the reverse order.
Unlock both ISOFIX connectors 6 through operating the adjustment
button 4 in the middle of the base and one of the base’s side buttons 5
simultaneously.
Pull the ISOFIX connectors 6 out of the ISOFIX guides 2.
Push the connectors 6 back into the original position by pressing the
adjustment button 4 in the middle of the base
By pressing the adjustment button you can push back the support leg 3
into its original position and then fold it back to save space.
INSTALLING THE INFANT CAR SEAT
ON THE BASE
NOTE! Make sure that the surface of the base is clear of free objects.
Place the car seat in rearward facing position on the base. Please ensure
that both locking bars lock with an audible „CLICK“.
Check whether the base indicator on the base is GREEN. If the indicator
7 is not green, the car seat is not sufficiently locked. If necessary, repeat
the procedure.
Make sure that the child is secured with the integrated harness system.
AVVISO! Prestare attenzione che la base poggi completamente al sedile
della vettura.
AVVERTENZA! Il piede di supporto 3 deve essere a contatto diretto
con il pianale.
Tra il pianale della vettura e il piede di supporto 3 non devono esserci
oggetti o spazi vuoti. Se la vettura dispone di spazi di stivaggio nel vano
piedi rivolgersi assolutamente al costruttore.
Smontaggio della base
Eseguire i passi di montaggio nella sequenza inversa.
Sbloccare i due connettori ISOFIX 6 azionando contemporaneamente
uno dei tasti laterali 5 e il tasto di sbloccaggio centrale 4.
Estrarre i connettori ISOFIX 6 dagli ausili di introduzione 2.
Spingere nuovamente i connettori 6 nella posizione di partenza tenendo
premuto il tasto di sbloccaggio centrale 4.
Premendo il tasto di regolazione il piede di supporto 3 può essere spinto
nella sua posizione di partenza e quindi chiuso in modo salvaspazio.
MONTAGGIO DEL SEGGIOLINO AUTO
SULLA BASE
AVVISO! Accertarsi che sulla superficie della base non siano presenti
corpi estranei.
Posizionare il seggiolinoauto sulla base nel senso opposto a quello di
marcia. Accertarsi che le due aste di blocco si innestino con un “CLIC”
udibile.
Controllare se l’indicatore della base è VERDE. Se l’indicatore 7 non è
VERDE, vuol dire che il seggiolino non è bloccato correttamente. Ripete-
re eventualmente la procedura.
Accertarsi che il bambino sia stato allacciato con il sistema di cinture di
sicurezza integrato.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Recaro Kio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Recaro Kio in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info