7894
42
Zoom out
Zoom in
Previous page
1/47
Next page
www.rebox.tv
42
To set the position of your selected satellite:
1. Use your UP/DOWN buttons to go to the “Movement field”.
2. Use your Left/Right buttons to have your dish turn towards the right direction, and keep this
direction button pushed in continuously. Once the receiver has found the right position for the
selected satellite, the word “Locked” will appear above the signal level and quality indicator. To be
sure you have the strongest signal possible, press the direction you moved your dish in once
again, and look if the signal/quality improves. If this is not the case, move the dish back one
position, by pressing the other direction once.
3. If you are sure that you have the strongest signal/quality for the selected satellite:
Use your UP/DOWN buttons to go to the “Save” field.
Use your Left/Right buttons to set to “On” and press OK. The position for the selected
satellite is now saved and your dish will move to this position, every time a channel from this
satellite is chosen.
Repeat this procedure for every satellite position and once you have complete the settings: Use Red (Auto Scan),
Green (Net. Scan), Yellow (TP Scan) or Blue (PID) to search channels.
5.1.4.4 Parental Lock - Changing PIN Code
This function changes the Personal Identification Number (PIN) that is used to control access to the menu and
individual channels. In this function, you can lock/unlock channels and you can change your PIN code by applying
the following steps: To lock/unlock the menu, please apply the following steps:
1. Press the Menu button on your remote.
2. Using UP/DOWN keys on your remote, select "Installation" and press OK.
3. Enter your PIN code.
4. Using UP/DOWN keys, select "Parental lock" and press OK.
5. Using RIGHT/LEFT keys in the “Menu” field, you can select either "lock" or "unlock" and press the
Red button to save, the Green button to save & exit, or the Yellow button to return without saving.
By selecting "lock", the receiver asks you to enter your PIN every time you want to access the
menu. By selecting "unlock" it gives you the possibility to access the menu all the time without the
receiver asking you for a PIN code.
To change your PIN code, apply the following steps:
1. Press the Menu button on your remote.
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Enter your PIN code
4. Using UP/DOWN keys, select "Parental lock" and press OK.
5. Using UP/DOWN keys, select "Old PIN" and enter your PIN
6. Using UP/DOWN keys, select "New PIN" and enter a new PIN
7. Using UP/DOWN keys select "Verify PIN" and enter the same new PIN
8. Press the Green button on your remote to save & Exit
9. Press the BACK button until you go back to main menu.
You are recommended to write down your new PIN code. In case you forget it, you can reset your receiver to factory
default settings but you will lose all information you saved.
Your Personal PIN Code: _ _ _ _ _ _ _ _ _ _ _ _ _ _
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rebox RE-2250MG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rebox RE-2250MG in the language / languages: Dutch as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info