7894
32
Zoom out
Zoom in
Previous page
1/47
Next page
www.rebox.tv
32
Optional: Connect the audio left and right RCA-plugs (Red and White) on the back of your
receiver to the left and right input of an Audio amplifier, so you can enjoy the excellent quality of
the sound that is produced by your Rebox receiver.
Note: If you have an digital audio amplifier with an coaxial input, use the S/PDIF output. at the back of your receiver.
3.1.4 Connection with Audio Cable RCA Connectors (Please see inside cover Figure 7)
On the back of your receiver you will find 3 RCA connectors (Audio Left & Right Red & White,
Video - Yellow)
Install an audio/video cable between the RCA connectors of the receiver and those of your TV set
or amplifier.
3.1.5 Connection to a digital audio amplifier using the S/PDIF output (Please see inside cover Figure 8)
Connect the S/PDIF out connector on the back of your receiver to the S/PDIF input connector of
your digital amplifier.
Do not forget to turn the S/PDIF function “Enabled” in the menu.
3.1.6 Connecting a remote eye (Please see inside cover Figure 9)
Connect the IR sensor to your remote eye if you wish to store your receiver in a place where the
IR on your receiver cannot communicate with the remote.
For example, if you wish to put your receiver in a closed environment such as a well ventilated closet, then this
accessory will be useful because it can allow the remote control to control the receiver through the remote eye.
3.1.7 Connecting a serial cable
This serial port is for service purpose only, it can only be used by our service department.
3.2 Connecting to a satellite dish
3.2.1 Connecting a fixed satellite dish to your receiver (Please see inside cover Figure 11)
Select the satellite from which you want to receive your TV/Radio channels.
Align your dish at the requested satellite.
Connect a coaxial cable to your LNB.
Connect the other end directly to the SAT IN connector of your receiver.
3.2.2 Connecting multiple fixed dishes to your receiver using a DiSEqC1.0 switch (Please see inside cover
Figure 12)
If you want to watch programs from more than one satellite (For instance from Astra and from Hot Bird) it is
advisable to use fixed dishes and a DiSEqC 1.0 switch.
Have your Rebox Dealer aim the dishes at the requested satellites.
Connect the LNB's with coaxial cables to the IN connectors of the DiSEqC 1.0 switch.
Connect the OUT connector of the DiSEqc 1.0 switch to the SAT IN connector at the back of your
receiver.
3.3.3 Connecting a dish on a motorized positioner to your receiver (Please see inside cover Figure 13)
Another possibility of watching programs from multiple satellites is by mounting a dish to a motorized DiSEqc 1.2
positioner.
Have your Rebox dealer mount the dish to the positioner with the correct azimuth angle of
elevation and let him set the centre point for your positioner.
Connect the LNB with a coaxial cable to the LNB IN connector of the positioner.
Connect the OUT connector of the positioner to the SAT IN connector at the back of your receiver.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rebox RE-2250MG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rebox RE-2250MG in the language / languages: Dutch as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info