7894
31
Zoom out
Zoom in
Previous page
1/47
Next page
www.rebox.tv
31
7. IR SENSOR
Use this connector to connect your remote eye (optional accessory) to control your receiver, for example once your
receiver is hidden in a well ventilated cabinet
8. RS 232 Serial Port
This serial port is for service purpose only.
9. Input Antenna
RF Modulator (female part). If you have cable TV or if you have an outdoor antenna, then you can connect the RF
cable coming from the antenna or wall connector to this ANT input.
10. To TV
RF Modulator (male part). If you do not use a scart cable to connect your receiver to your TV, or if you have
connected a cable to the ANT input, you will have to use this connector to connect the receiver to your TV by using
a coaxial cable. You can also use this connector to connect a second TV set to your receiver.
11. S/PDIF
Use this coaxial output to connect your receiver to the input of your digital audio amplifier.
12. Power Cord
Your receiver requires a mains voltage supply of 90~240 V AC (Auto-selectable), 50~60 Hz +/- 5 %. Make sure to
check the power specification of the wall outlet before connecting your receiver to the main power.
3.0 Connections
3.1 Connecting to your TV & VCR
Warning:
If you are not sure how to connect your receiver, do not take the risk of doing it yourself. Ask your Rebox dealer to
do it for you. They are specially trained by our technicians and can get the best performance out of your receiver.
3.1.1 Basic connection with a coaxial cable (Please see inside cover Figure 4)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TO TV connector at the back of the receiver to the ANT IN connector on your TV set.
Optional: Connect a UHF coaxial lead coming from your Cable TV or Outdoor Antenna to the ANT
input connector at the back of the receiver.
3.1.2 Basic connection with a Scart cable (Please see inside cover Figure 5)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV
set.
Optional: Connect a UHF coaxial lead coming from your Cable TV or Outdoor Antenna to the ANT
input connector at the back of the receiver.
Note: We recommend you to use a scart cable to connect your satellite receiver to you TV, this will ensure a better
Picture and Sound quality.
3.1.3 Advanced connection (Please see inside cover Figure 6)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV
set.
Connect the VCR scart connector at the back of the receiver to the scart-in connector on your
VCR set.
Connect a UHF coaxial lead coming from your Cable TV or Outdoor Antenna to the ANT input
connector at the back of the receiver.
Connect a coaxial cable to the TO TV connector at the back of the receiver. Connect the other end
of this coaxial cable to the ANT IN connector of your VCR.
Connect the TV OUT connector of your VCR to the ANT IN connector of your TV set with a coaxial
cable.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rebox RE-2250MG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rebox RE-2250MG in the language / languages: Dutch as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info