527633
9
Zoom out
Zoom in
Previous page
1/17
Next page
LOGO Mobile Phone User Manual
___________________________________________________________
____________________________________________
© 2010 Real Phone Corporation. All Rights Reserved. PAGE 9
also be turned on from the Profile screen in the Settings menu.
6.10 Adjusting the Volume
During a call you can adjust the receiver or speaker volume with the up and down scroll keys.
During a call, you can press left soft key and select Mute in the Call Menu to silence the microphone.
To restore the normal call function, select un-mute in the Call Menu.
Useful Tip
Note that while using menus the phone will display reverse highlighted text
to indicate the selection that will be made if the OK key is pressed.
7 Menu Operation
From the Home screen press left soft key to access the Main menu sections. The up/down scroll keys are
used to access the following menu sections:
Voice Recognition Messages Phonebook Call Register Settings Tools
To select a menu section, press the OK key or the left soft key “Accept”.
7.1 Voice Recognition
7.1.1 Name Dialing
By selecting Name Dialing the phone will prompt, “Say the Name”. If the name spoken matches a voice
tag previously recorded in the Phonebook that number will be dialed after confirmation. To confirm press
the OK key or the YES left soft key. If the name is incorrect, press the right soft key NO, and the phone
will prompt again, “Say the Name” in attempt to find the correct number.
7.1.2 Voice Digit Dialing
When selecting Digit Dialing the phone will allow you to speak the number digit by digit. When the
number is fully entered, press the SEND” key to dial.
7.1.3 Voice Training
The selection is used to activate the voice recognition training. Press OK to start the training process
and follow the voice prompts. See Voice Training above for more information on successful training.
7.1.4 Settings
VR On/Off: When selecting “on” the voice recognition features are enabled. When selecting “off”, the
voice recognition functions are disabled. Pressing the green SEND key from the main menu will directly
access the Call Register if VR is set to “off.”
Confirm Number: When selecting “On”, numbers spoken by the user will be repeated digit dialing is
executed. When “OFF” is selected, digit dialing will be executed as soon as the last digit is spoken and
the SEND key is pressed.
Confirm Input Method: When “Press Keypad” is selected voice command confirmation is disabled.
When " Voice Command” is selected confirmation by use of Voice Commands is enabled.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Real Phone LOGO R11C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Real Phone LOGO R11C in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info