527633
8
Zoom out
Zoom in
Previous page
1/17
Next page
LOGO Mobile Phone User Manual
___________________________________________________________
____________________________________________
© 2010 Real Phone Corporation. All Rights Reserved. PAGE 8
6.5 Virtual Keypad
The LOGO Mobile Phone has no alphanumeric keypad. If conditions, like a very noisy environment,
prevent the use of the voice recognition, and the number needing to be called has not been previously
recorded in the phone, the LOGO has a virtual keypad that can be used to enter the number. To
access the Virtual Keypad press the OK key from the main screen. The screen will change to the
Virtual Keypad as an alternative to voice input for entering phone and other number sequences
required by various functions. Follow the on screen instructions. Press the Up and Down scroll keys to
navigate the keypad. Pressing and holding down a scroll key for about 2 seconds will transition
between the upper and lower tables for faster use. The “Delete” soft key will erase the last entry if a
mistake is made. When the complete number has been entered, press the “Save” soft key if you want
to enter the number in the Phonebook with a voice tag. If you want to dial, simply press the “Send” key
to dial the number.
6.6 Making a Call
There are 5 ways to originate a call with the LOGO Mobile Phone.
1. Speaking the desired digits
2. Speaking a name recorded as a voice tag in the Phonebook
3. Selecting a number from the Call Register
4. Selecting a number by browsing the entries in the Phonebook.
5. Accessing the Virtual Keypad and entering the desired number.
Press the Red END key to end or cancel a call.
6.7 Using the Voice Recognition Function
The LOGO Mobile Phone is designed to be easily operated with its embedded voice recognition
software. As described above the handset must be trained to recognize the user’s voice. After
completing the voice recognition training, a call can be placed by pressing the Green SEND key. The
handset will respond with “Say a Command”. In order to place the call by speaking the digits,
respond with the Command “Call” and then follow the dialing prompts. To make a call using the
Phonebook respond with the Command “Phonebook” and when prompted say the name that has been
recorded as a voice tag associated with the desired number. Confirmation of the desired number is
done by pressing the OK key or by saying “Yes” (depending on the confirmation setting; see Settings
menu).
6.8 Answering an Incoming Call
If incoming call number identification service is available from the wireless carrier and the incoming
number is stored in the handset’s Phonebook, the incoming number will be displayed on the screen
and the voice tag associated with the number in the Phonebook will be announced. To answer the call,
press the Green SEND key or left soft key. To reject the call, press the Red END key or right soft key.
6.9 Turning on the Speaker
The LOGO is equipped with a small loud speaker to allow use of the phone when holding it in front of
your face. The speaker can be turned on by pressing the left soft key “Options” during a call. It can
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Real Phone LOGO R11C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Real Phone LOGO R11C in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info