Manual Raymarine MN100 (page 37 of 44) (English)

672949

Zoom out

Zoom in

1/44

Installation

www.raymarine.com

5.4 Surface Mounting

Where there is no access to the rear of the mounting surface

Easy installation but will allow removal without gaining access to the

boat. Position the supplied Template carefully before starting.

1. Drill three 2.5mm holes marked "B" on the template.

2. Carefully snap the facia of the display off the main body taking care

not to drop the button pads.

HINT – It may be useful to place a piece of sticky tape across the

front of the buttons before removing the facia to prevent them from

falling out during the installation.

3. Remove the three captive M4 nuts from the plastic moulding and

attach the display to the mounting surface using the three self

tapping screws provided. Take care not to over tighten the screws as

this may cause the moulding to crack.

4. Check the display is perfectly level; carefully position the button

inserts into the correct slots and snap the facia back into position.

Temporary Mounting

1. Use the double sided tape provided to secure the display to a

suitable mounting surface. Press the display firmly against the

surface until secure.

This method is recommended for temporary use only. For

example, finding an appropriate location before drilling holes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine MN100 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine MN100

Raymarine MN100 User Manual - Dutch - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Raymarine MN100 Manual

Product: