558423
84
Zoom out
Zoom in
Previous page
1/460
Next page
5.1 Mounting - a Series
Mounting
the display can be surface mounted.
Before mounting the unit, ensure that you have:
Selected a suitable location.
Identied the cable connections and route that the
cables will take.
Detached the front bezel.
D12585-2
0
1. Check the selected location for the unit. A clear,
at area with suitable clearance behind the panel
is required.
2. Drill or knock out the 4 mounting holes on the unit
D12588-1
0
0
0
0
0
0
3. Fix the appropriate cutting template supplied
with the product, to the selected location, using
masking or self-adhesive tape.
4. Using a suitable hole saw (the size is indicated
on the template), make a hole in each corner of
the cut-out area.
5. Using a suitable saw, cut along the inside edge
of the cut-out line.
6. Ensure that the unit ts into the removed area
and then le around the rough edge until smooth.
7. Drill 4 holes as indicated on the template to
accept the securing screws.
8. Place the gasket onto the display unit and press
rmly onto the ange.
9. Connect the power, data and other cables to the
unit.
10.Slide the unit into place and secure using the
provided xings.
Note: The supplied gasket provides a seal
between the unit and a suitably at and stiff
mounting surface or binnacle. The gasket should
be used in all installations. It may also be
necessary to use a marine-grade sealant if the
mounting surface or binnacle is not entirely at and
stiff or has a rough surface nish.
Bracket (trunnion) mounting
The display can be mounted on a trunnion bracket.
Before mounting the unit ensure that you have:
Selected a suitable location.
Identied the cable connections and route that the
cables will take.
Attached the front bezel.
D12578-2
1. Mark the location of the mounting bracket screw
holes on the chosen mounting surface.
2. Drill holes for the screws using a suitable drill,
ensuring there is nothing behind the surface that
may be damaged.
3. Use the xings supplied with the mounting
bracket to attach securely.
4. Attach the display to the mounting bracket.
Front bezel
Attaching the front bezel
The following procedure assumes that the unit has
already been mounted in position.
84 a Series / c Series / e Series
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine c Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine c Series in the language / languages: English as an attachment in your email.

The manual is 30,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine c Series

Raymarine c Series User Manual - German - 396 pages

Raymarine c Series User Manual - Dutch - 394 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info