632982
9
Zoom out
Zoom in
Previous page
1/32
Next page
9
5. Ignition Key: Remember to remove the key when not in use. Do
n
ot leave the ignition on when not in use, especially when charging
the vehicle (Fig 1). Note: You may need to press the ignition key
gently inwards before it will allow itself to be turned.
6. Finger control: To operate, turn on the ignition. Pull the right hand
l
ever towards you and the machine moves forward. The more you pull
the lever the faster the scooter goes. To brake, release the lever. Again
the faster the lever is released the quicker you will stop. To reverse, pull
the left lever towards you. Do not pull both levers at once. Note: The
controls can be changed for customers with a left-hand bias. Please
contact your local dealer for information.
7. Lighting control: To switch on the scooter front and rear lighting press the lighting switch once, to turn it
off, press the switch a second time.
8. Hazard lights: In an emergency or during a break-down, the hazard lights should be switched on.
Press the hazard light button once to switch on - All turn indicators will flash together. Press the button for
a second time to switch the hazard lights off.
9. Indicator (left turn): Press this once to start the left turn indicator flashing, press again to stop.
10. Half speed switch: When travelling in pedestrian areas (not on the road) this switch can be pressed to
limit the maximum scooter speed to 50% of the value pre-selected by the speed control (2) knob. This
means that the scooter will not be able to travel at more than 4mph. To turn this function off, press the
switch for a second time.
11. Indicator (right turn): Press this once to start the right turn indicator flashing, press again to stop.
12. Battery cut-out: Your scooter is equipped with a battery cut-out
(Fig 2) that is designed to operate in the unlikely event of an electrical
or electromechanical overload and is located beneath the front edge
of the seat on the black cover. If this activates, all power will be cut
from the batteries to the scooter. This device can be re-set by
pressing the button shown in the illustration. Should it activate for a
second time please seek advice from your dealer.
13. Hour meter: Your scooter is equipped with an hour meter. This
records the total time that the scooter has been run from new. This
meter cannot be reset by the user.
14. Indicator Lights/ LEDs: Along the upper edge of the dashboard there are a row of LEDs that indicate
which functions are active. As a function becomes active, a corresponding LED will light - when the
function is switched off, the corresponding LED will extinguish.
15. Temperature Indicator: This shows the current ambient temperature in degrees Celsius.
Charging Point: The charging point is situated on the left hand side
of the scooter tiller. See the Charging section for further instructions.
2
1
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rascal Vision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rascal Vision in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info