661013
25
Zoom out
Zoom in
Previous page
1/102
Next page
en-25
7 OPERATION
7.3.3 HYDRAULIC 5/7 STANDS ______________________________________________
1. The Hyd 5/7 should be mounted/stored on the stands
supplied (A).
7.3.4 CONNECTING THE THREE POINT LINKAGE ______________________________
1. Reverse the tractor upto the Hyd 5/7.
2. Connect the Lower Link Arms (A).
3. Connect the Top Link. (B) The Top Link should be
positioned on the tractor to limit the movement of the
draft control. Also check for adequate clearance
between Hyd 5/7 hydraulic tank and top link when the
Hyd 5/7 is lowered.
7.3.5 CONNECTING THE PTO _______________________________________________
1. Connect the PTO to the Tractor and the Hyd 5/7
Mk4.(A). The PTO is fitted with an overrun clutch
that must be fitted at the tractor end.
2. Secure the guards with PTO safety chains (B).
These should be attached to the Tractor PTO guard
and the Hydraulic 5/7 PTO guard.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Hydraulic 5-7 mk4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Hydraulic 5-7 mk4 in the language / languages: English, Dutch as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info