661013

Ransomes Hydraulic 5-7 mk4 Manual

24
Zoom out
Zoom in
Previous page
1/102
Next page
en-24
7 OPERATION
7.3 ATTACHING THE REAR UNIT TO THE TRACTOR. _________________________
Before attachment can be made to the tractor it is essential that the tractor dealer has carried out the necessary
dealer modifications required for the fitment of the Hydraulic 5/7 to that model of tractor.
7.3.1 TRACTOR SPECIFICATION TO INCLUDE ________________________________
1. Minimum of 50 hp at tractor P.T.O.
2. CAT 2 Three Point Linkage. Capable of Carrying/Lifting a minimum of 1250kg static weight.
3. 12V 25 Amp Three Terminal Electrical Socket. (Power(Switched from Ignition), Power (12V 25 Amp
Permanent Live), Earth.
4. 7 pin Lighting Bar Electrical Socket.
5. 540 RPM PTO, 1 3/8" 6 Spline Output.
6. Detented/Locked Out, Full Flow Auxillary Spool Valve. Minimum Pressure 152 BAR. Minimum
Continuous flow 9 litres/minute.
7. A minimum of 20% of the tractor unladen weight to be on the tractor front axle when fitted with Hyd. 5/7
Mk4. Ballast Weight Maybe Required.
8. Maximum Tractor Step Height of 530mm.
9. The height the unit can be lifted to be restricted to prevent damage to Tractor or Hyd 5/7 Mk4.
7.3.2 PRE FITTING REQUIREMENTS/INSPECTION _____________________________
1. The Hyd 5/7 Mk4, Front Units 2/3 Belly Frame, Cutting Units 2/3 and Hoses (Cutting Motor Pressure,
Return, Drain and Unit Lift) should already be fitted. These are Dealer/Workshop fit items.
2. Ensure Hose Quick Release Couplings are clean and that Hoses are routed Correctly below the tractor,
so as to be clear of all moving parts, possible abrasion, twisting and sharp bends.
3. Ensure Hyd 5/7 Mk 4 Control Panel is fitted and secure. This is a Dealer/Workshop fit item.
4. Ensure tractor is fitted with appropriate operational decals.
5. Ensure PTO has been modified to the correct length, in accordance with the instructions supplied with the
PTO shaft. The PTO supplied has an overrun clutch and must be fitted the correct way round.
6. Ensure all transport locks on the Hyd 5/7 (including Belly Frame) are locked in position.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Hydraulic 5-7 mk4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Hydraulic 5-7 mk4 in the language / languages: English, Dutch as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info