661002
57
Zoom out
Zoom in
Previous page
1/198
Next page
en-55
7 OPERATION
A
B
C
D
Ransomes Jacobsen grinding paste:
PROCCEDURE
1. Apply an even coat of backlapping compound to the
entire length of each blade of the reel.
2. Turn the Reel Speed Control valve counterclockwise
(C) see section 6.8 Reel Speed Control to allow reels
to rotate at there slowest speed.
3. Set the backlap switch (A) see section 6.2F to the
backlap position .
4. Start the engine and set the throttle to low idle.
Switch the cutting unit switch (PTO) (B) see section
6.2E to the on position.
5. Slowly turn the Reel Speed Control knob clockwise
(D) until the desired reel rotation speed is attained. It
should be slow enough so that the reel will not throw
off the backlapping compound as it spins.
NOTE
The operator can leave the driving seat for 3 minutes
during backlapping before the machine shuts down
unless it see’s a manual input.
6. Once all the blades on the reel are uniformly sharp,
shut off the engine and switch the cutting unit switch
(PTO to the off position. Set the backlap switch to off
and close the Reel Speed Control (all the way
clockwise).
NOTE: To ensure proper reel rotation, make sure the Reel Speed Control is completely closed.
7. Wash all of the backlapping compound from all of the heads. Once they are thoroughly cleaned and dry,
apply a light film of oil to the cutting edges to help prevent rust.
8. After backlapping, the reel to bedknife adjustment should be made again.
Grinding Paste
Part Number
80 grit grinding paste, 4.5kg tin
5002488
120 grit grinding paste, 4.5kg tin
5002489
80 grit grinding paste, 9kg tin
5002490
120 grit grinding paste, 9kg tin 5002491
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ransomes Highway 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ransomes Highway 3 in the language / languages: English, Dutch as an attachment in your email.

The manual is 27,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info