623533
22
Zoom out
Zoom in
Previous page
1/28
Next page
20
Electrical Connection
The dishwasher must be installed by a qualied electrician,
in accordance with all relevant British Standards/Codes of
Practice (in particular BS 7671), or with the relevant national
and local regulations.

WARNING: THIS DISHWASHER MUST BE EARTHED
All external wiring must comply with the IEE Regulations
for the Electrical Equipment of Buildings. Connection to the
electrical supply can be made with either a plug and socket
or be permanently wired via a double pole switch. The
dishwasher is supplied with a 3-core cable.
Should the plug not t the socket in your home, it should be
removed and replaced with a suitable plug.
Note: If the plug that is tted is not suitable, it must be cut o
and disposed of properly. To avoid the risk of electrocution,
the plug must not be left where children might nd it and
plug it into a supply socket.
Three pin plugs to BS 1363 with a capacity of not less than
13A must be used and tted with a 13 amp fuse ASTA
approved to BS 1362.
After replacing the fuse the cover must be retted. If the
cover is lost, the plug must not be used until a replacement
cover has been obtained from your supplier. The colour of the
correct fuse carrier is that of the coloured insert in the base of
the fuse recess, or stated elsewhere on the plug. Always state
this colour when ordering a replacement fuse carrier.
IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code:
Green and yellow: EARTH
Blue: NEUTRAL
Brown: LIVE

CAUTION
The dishwasher plug must be accessible even when
the dishwasher is installed as a built-in unit so that
maintenance can be carried out safely.
Care for the external cable
• Hold the plug, not the electrical cable, when
unplugging the dishwasher.
• Make sure that the dishwasher does not trap the electric
cable.
• Do not step on the cable.
• Avoid damage to the electric cable when moving the
dishwasher.
Damaged electrical cable
If the electrical cable is damaged or worn, switch o the
dishwasher and consult an authorized agent for replacement.
Installing the Dishwasher
The dishwasher is supplied with a template for marking and
drilling decorative door fronts. This template also contains
details for installing the dishwasher.
General
Measures must be taken to ensure that the units that are
subsequently re-sited as freestanding dishwashers cannot
topple over. This can be achieved by bolting the dishwasher
to the wall or tting it under a continuous work surface, that
is screwed to the adjacent cupboards.
For detailed information on performance tests, please contact
the following:
Dishwasher@standardtest.com
In your e-mail, please provide the model name and serial
number (20 digits) which can be found on the side of the
dishwasher door.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rangemaster RDW1045FI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rangemaster RDW1045FI in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info