685842

RAINBIRD SUPER IMAGE SERIES Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
A
Prog A
%
STA
V. SET WATER BUDGET
(Modify the water application).
Icon : percentage sign
The SUPER IMAGE controller has a Water Budget function used to adjust watering time for each program from 0 to 200
% without re-setting the watering time for each station.
Press the
key until this display appears :
Use the A/B key to select the program you wish to water budget. In the
above example, it is program A.
Use the +/ON and -/OFF keys to set the water budget in increments of 10 %.
100 % is the starting point. The duration in this case will be what you have
already programmed.
To reduce the watering time, use the -/OFF key.
Example : “80” in the display means you have reduced the watering time by
20 % on all stations. An initial duration of 10 minutes which you previously
programmed will now be cut to 8 minutes. Use the +/ON key to increase the
watering time.
Note : make sure that the increase in watering time does not result in program overlap.
%
VI. MANUAL SINGLE STATION START
Icon : hand + STA
Repeatedly press the
key until this display appears :
The station number appears at the left of the display (example: station 1).
Repeatedly press the key until the desired station number appears.
In our example, now press the +/ON key to manually start station 1. The
sprinkler in the display begins to “water”.
Blinking stream
The watering time appears in the display. The remaining watering time is
counted down. If you press the key while a station is watering, the controller
will move to the next station and begin watering. If you wish to stop watering
before the scheduled duration is up, press the -/OFF key. The stream
disappears. Only the station number appears.
Note : water budgeting does not operate in the manual single station mode.
IV. SET THE LENGTH OF WATERING TIME PER STATION
Icon : hour-glass
Repeatedly press the key until this display appears :
The station number appears at the left.
To set the station watering time, use the +/ON and -/OFF keys. The duration
is set in 1 minute increments from 0 minutes to 12 hours.
Holding down the +/ON or -/OFF keys will speed up the setting.
Each station must be assigned to a program.
Use the A/B key to assign the station to program A or B.
The letter A or B will appear at the right of the screen to indicate which
program you have selected. Press the key to move to the next station.
Note : Be careful not to schedule programs that will overlap. If you do not
leave enough time for all the stations to water, the controller will simply delay the second start time until the previous
cycle is completed.
STA
3


Need help? Post your question in this forum.

Forumrules
1

Forum

rainbird-super-image-series

Reset search

  • Good morning. I have IMAGE 4. I have imposted a new program for four stations. After done first station there aren't daai for another statons. All the data imposted are cancelled. Thanks you Submitted on 1-8-2023 at 15:17

    Reply Report abuse

  • i need a new float valve in the tank and can't find one. and one of the spray units is leaking Submitted on 5-8-2022 at 16:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RAINBIRD SUPER IMAGE SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RAINBIRD SUPER IMAGE SERIES in the language / languages: English as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info